Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

NHH-85B-R2B

6-port sector antenna, 2x 698–896 and 4x 1695–2360 MHz, 85° HPBW, 2x RET. Both high bands share the same electrical tilt.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Interleaved dipole technology providing for attractive, low wind load mechanical package
  • Internal SBT on low and high band allow remote RET control from the radio over the RF jumper cable
  • Separate RS-485 RET input/output for low and high band
  • One RET for low band and one RET for both high bands to ensure same tilt level for 4x Rx or 4x MIMO

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 3
Internal RET High band (1) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.85 in
Depth 180 mm | 7.087 in
Length 1851 mm | 72.874 in
Net Weight, without mounting kit 19.8 kg | 43.651 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain, dBi 14.4 14.4 17.1 17.6 17.9 18.1
Beamwidth, Horizontal, degrees 83 87 80 79 78 78
Beamwidth, Vertical, degrees 12.3 11.2 5.7 5.3 5 4.6
Beam Tilt, degrees 0–12 0–12 0–8 0–8 0–8 0–8
USLS (First Lobe), dB 18 16 14 16 17 18
Front-to-Back Ratio at 180°, dB 28 26 34 30 30 30
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain by all Beam Tilts, average, dBi 14.1 14.1 16.6 17.3 17.6 17.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.6 ±0.4 ±0.4 ±0.4
Gain by Beam Tilt, average, dBi 0 ° | 14.1
6 ° | 14.2
12 ° | 14.0
0 ° | 14.0
6 ° | 14.3
12 ° | 13.8
0 ° | 16.6
4 ° | 16.6
8 ° | 16.7
0 ° | 17.3
4 ° | 17.4
8 ° | 17.3
0 ° | 17.6
4 ° | 17.6
8 ° | 17.5
0 ° | 17.6
4 ° | 17.8
8 ° | 17.6
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±2 ±4.8 ±4.0 ±4.0 ±2.6
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.9 ±0.2 ±0.2 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 18 16 14 15 16 17
Front-to-Back Total Power at 180° ± 30°, dB 22 22 27 26 25 26
CPR at Boresight, dB 21 22 19 19 19 22
CPR at Sector, dB 20 20 15 17 17 16

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.27 m² | 2.906 ft²
Effective Projective Area (EPA), lateral 0.22 m² | 2.368 ft²
Mechanical Tilt Range 0°–15°
Wind Loading @ Velocity, frontal 283.0 N @ 150 km/h (63.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 234.0 N @ 150 km/h (52.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 545.0 N @ 150 km/h (122.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 287.0 N @ 150 km/h (64.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 380 mm | 14.961 in
Depth, packed 295 mm | 11.614 in
Length, packed 1973 mm | 77.677 in
Weight, gross 31.1 kg | 68.564 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 3
Internal RET High band (1) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.85 in
Depth 180 mm | 7.087 in
Length 1851 mm | 72.874 in
Net Weight, without mounting kit 19.8 kg | 43.651 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain, dBi 14.4 14.4 17.1 17.6 17.9 18.1
Beamwidth, Horizontal, degrees 83 87 80 79 78 78
Beamwidth, Vertical, degrees 12.3 11.2 5.7 5.3 5 4.6
Beam Tilt, degrees 0–12 0–12 0–8 0–8 0–8 0–8
USLS (First Lobe), dB 18 16 14 16 17 18
Front-to-Back Ratio at 180°, dB 28 26 34 30 30 30
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain by all Beam Tilts, average, dBi 14.1 14.1 16.6 17.3 17.6 17.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.6 ±0.4 ±0.4 ±0.4
Gain by Beam Tilt, average, dBi 0 ° | 14.1; 6 ° | 14.2; 12 ° | 14.0 0 ° | 14.0; 6 ° | 14.3; 12 ° | 13.8 0 ° | 16.6; 4 ° | 16.6; 8 ° | 16.7 0 ° | 17.3; 4 ° | 17.4; 8 ° | 17.3 0 ° | 17.6; 4 ° | 17.6; 8 ° | 17.5 0 ° | 17.6; 4 ° | 17.8; 8 ° | 17.6
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±2 ±4.8 ±4.0 ±4.0 ±2.6
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.9 ±0.2 ±0.2 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 18 16 14 15 16 17
Front-to-Back Total Power at 180° ± 30°, dB 22 22 27 26 25 26
CPR at Boresight, dB 21 22 19 19 19 22
CPR at Sector, dB 20 20 15 17 17 16

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.27 m² | 2.906 ft²
Effective Projective Area (EPA), lateral 0.22 m² | 2.368 ft²
Mechanical Tilt Range 0°–15°
Wind Loading @ Velocity, frontal 283.0 N @ 150 km/h (63.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 234.0 N @ 150 km/h (52.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 545.0 N @ 150 km/h (122.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 287.0 N @ 150 km/h (64.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 380 mm | 14.961 in
Depth, packed 295 mm | 11.614 in
Length, packed 1973 mm | 77.677 in
Weight, gross 31.1 kg | 68.564 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

Product Specification

Product Specification