Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RR-65B-R2

4-port sector antenna, 4x 694–960 MHz, 65° HPBW, 2x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 1828 mm | 71.969 in
Net Weight, antenna only 33 kg | 72.752 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2
Frequency Band, MHz 694–790 790–890 890–960
RF Port 1-4 1-4 1-4
Gain at Mid Tilt, dBi 14.2 14.7 15.4
Beamwidth, Horizontal, degrees 67 64 58
Beamwidth, Vertical, degrees 12.1 10.8 10.1
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 19 21 24
Front-to-Back Ratio at 180°, dB 31 33 29
Front-to-Back Total Power at 180° ± 30°, dB 21 21 22
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960
Gain by all Beam Tilts, average, dBi 14.2 14.6 15.2
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.6 ±0.4
Beamwidth, Horizontal Tolerance, degrees ±4 ±4 ±3
Beamwidth, Vertical Tolerance, degrees ±1 ±0.9 ±0.6
USLS, beampeak to 20° above beampeak, dB 18 18 16
CPR at Boresight, dB 22 23 25
CPR at Sector, dB 10 9 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 711.0 N @ 150 km/h (159.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 229.0 N @ 150 km/h (51.5 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 998.0 N @ 150 km/h (224.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 563.0 N @ 150 km/h (126.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2015 mm | 79.331 in
Weight, gross 46.7 kg | 102.956 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 1828 mm | 71.969 in
Net Weight, antenna only 33 kg | 72.752 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2
Frequency Band, MHz 694–790 790–890 890–960
RF Port 1-4 1-4 1-4
Gain at Mid Tilt, dBi 14.2 14.7 15.4
Beamwidth, Horizontal, degrees 67 64 58
Beamwidth, Vertical, degrees 12.1 10.8 10.1
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 19 21 24
Front-to-Back Ratio at 180°, dB 31 33 29
Front-to-Back Total Power at 180° ± 30°, dB 21 21 22
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960
Gain by all Beam Tilts, average, dBi 14.2 14.6 15.2
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.6 ±0.4
Beamwidth, Horizontal Tolerance, degrees ±4 ±4 ±3
Beamwidth, Vertical Tolerance, degrees ±1 ±0.9 ±0.6
USLS, beampeak to 20° above beampeak, dB 18 18 16
CPR at Boresight, dB 22 23 25
CPR at Sector, dB 10 9 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 711.0 N @ 150 km/h (159.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 229.0 N @ 150 km/h (51.5 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 998.0 N @ 150 km/h (224.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 563.0 N @ 150 km/h (126.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2015 mm | 79.331 in
Weight, gross 46.7 kg | 102.956 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification