Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRVV-65D-R4

8-port sector antenna, 4x 694–960 and 4x 1695–2690 MHz, 65° HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
  • All Internal RET actuators are connected in “Cascaded SRET” configuration

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 43.6 kg | 96.121 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 15.7 16.4 16.9 18.5 18.9 19.1 19.2 18.8
Beamwidth, Horizontal, degrees 70 67 62 59 59 61 64 70
Beamwidth, Vertical, degrees 8.2 7.4 6.9 5.4 5.1 4.8 4.2 4
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 12 16 19 22 23 22 21 19
Front-to-Back Ratio at 180°, dB 32 32 32 36 37 37 35 31
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.6 16.1 16.7 18.0 18.7 18.8 18.9 18.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.4 ±0.8 ±0.4 ±0.4 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 15.5
7 ° | 15.7
12 ° | 15.5
2 ° | 16.1
7 ° | 16.2
12 ° | 15.9
2 ° | 16.7
7 ° | 16.8
12 ° | 16.4
2 ° | 17.9
7 ° | 18.2
12 ° | 17.9
2 ° | 18.5
7 ° | 18.8
12 ° | 18.5
2 ° | 18.6
7 ° | 19.0
12 ° | 18.7
2 ° | 18.7
7 ° | 19.0
12 ° | 18.7
2 ° | 18.1
7 ° | 18.6
12 ° | 18.4
Beamwidth, Horizontal Tolerance, degrees ±4.9 ±2.5 ±4.1 ±4.3 ±2.3 ±3 ±6.5 ±4.8
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.6 ±0.4 ±0.3 ±0.2 ±0.3 ±0.2 ±0.1
USLS, beampeak to 20° above beampeak, dB 12 15 17 15 18 18 17 15
Front-to-Back Total Power at 180° ± 30°, dB 21 21 23 29 32 29 27 26
CPR at Boresight, dB 24 24 25 20 21 21 17 15
CPR at Sector, dB 9 7 8 9 9 8 7 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,070.0 N @ 150 km/h (240.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 375.0 N @ 150 km/h (84.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 880.0 N @ 150 km/h (197.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 608 mm | 23.937 in
Depth, packed 352 mm | 13.858 in
Length, packed 2880 mm | 113.386 in
Weight, gross 67.1 kg | 147.930 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 43.6 kg | 96.121 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 15.7 16.4 16.9 18.5 18.9 19.1 19.2 18.8
Beamwidth, Horizontal, degrees 70 67 62 59 59 61 64 70
Beamwidth, Vertical, degrees 8.2 7.4 6.9 5.4 5.1 4.8 4.2 4
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 12 16 19 22 23 22 21 19
Front-to-Back Ratio at 180°, dB 32 32 32 36 37 37 35 31
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.6 16.1 16.7 18.0 18.7 18.8 18.9 18.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.4 ±0.8 ±0.4 ±0.4 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 15.5; 7 ° | 15.7;12 ° | 15.5 2 ° | 16.1; 7 ° | 16.2;12 ° | 15.9 2 ° | 16.7; 7 ° | 16.8;12 ° | 16.4 2 ° | 17.9; 7 ° | 18.2;12 ° | 17.9 2 ° | 18.5; 7 ° | 18.8;12 ° | 18.5 2 ° | 18.6; 7 ° | 19.0;12 ° | 18.7 2 ° | 18.7; 7 ° | 19.0;12 ° | 18.7 2 ° | 18.1; 7 ° | 18.6;12 ° | 18.4
Beamwidth, Horizontal Tolerance, degrees ±4.9 ±2.5 ±4.1 ±4.3 ±2.3 ±3 ±6.5 ±4.8
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.6 ±0.4 ±0.3 ±0.2 ±0.3 ±0.2 ±0.1
USLS, beampeak to 20° above beampeak, dB 12 15 17 15 18 18 17 15
Front-to-Back Total Power at 180° ± 30°, dB 21 21 23 29 32 29 27 26
CPR at Boresight, dB 24 24 25 20 21 21 17 15
CPR at Sector, dB 9 7 8 9 9 8 7 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,070.0 N @ 150 km/h (240.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 375.0 N @ 150 km/h (84.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 880.0 N @ 150 km/h (197.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 608 mm | 23.937 in
Depth, packed 352 mm | 13.858 in
Length, packed 2880 mm | 113.386 in
Weight, gross 67.1 kg | 147.930 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Product Specification

Product Specification