SBJAH4-1D65B-DL
12-port sector antenna, 2x 698–798, 2x 824-896 and 8x 1695–2360 MHz, 65° HPBW, 3x RET and low bands have diplexers
Features and Benefits
- Interleaved dipole technology providing for attractive, low wind load mechanical package
- Provides support for future Band 14 operations
- The antenna is supplied with mounting kits that provide 0 degree of mechanical downtilt; optional downtilt mounting kits are available
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 12 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Multi-RET) |
Dimensions
| Width | 350 mm | 13.78 in |
| Depth | 208 mm | 8.189 in |
| Length | 1828 mm | 71.969 in |
| Net Weight, without mounting kit | 26.5 kg | 58.422 lb |
Array Layout
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 798 MHz | 824 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–798 | 824–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain, dBi | 15.2 | 15.5 | 15.4 | 16.1 | 16.2 | 16.7 |
| Beamwidth, Horizontal, degrees | 68 | 65 | 63 | 63 | 65 | 65 |
| Beamwidth, Vertical, degrees | 11.7 | 10.3 | 11.3 | 10.4 | 9.8 | 8.9 |
| Beam Tilt, degrees | 2–14 | 2–14 | 2–14 | 2–14 | 2–14 | 2–14 |
| USLS (First Lobe), dB | 15 | 16 | 17 | 18 | 18 | 17 |
| Front-to-Back Ratio at 180°, dB | 29 | 31 | 30 | 33 | 32 | 34 |
| Isolation, Cross Polarization, dB | 28 | 28 | 28 | 28 | 28 | 28 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 | 350 | 350 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–798 | 824–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 14.9 | 15.3 | 15.3 | 15.8 | 15.9 | 16.4 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.3 | ±0.5 | ±0.4 | ±0.4 | ±0.4 |
| Gain by Beam Tilt, average, dBi | 2 ° | 14.9 8 ° | 15.014 ° | 14.7 | 2 ° | 15.2 8 ° | 15.414 ° | 15.2 | 2 ° | 15.3 8 ° | 15.414 ° | 15.2 | 2 ° | 15.8 8 ° | 15.814 ° | 15.7 | 2 ° | 15.8 8 ° | 15.914 ° | 15.7 | 2 ° | 16.4 8 ° | 16.414 ° | 16.3 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.7 | ±1.9 | ±3.4 | ±3 | ±4.0 | ±3.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±0.6 | ±0.7 | ±0.7 | ±0.6 | ±0.3 |
| USLS, beampeak to 20° above beampeak, dB | 15 | 16 | 17 | 18 | 18 | 17 |
| Front-to-Back Total Power at 180° ± 30°, dB | 24 | 23 | 25 | 27 | 25 | 27 |
| CPR at Boresight, dB | 18 | 20 | 18 | 20 | 21 | 23 |
| CPR at Sector, dB | 10 | 12 | 9 | 13 | 12 | 9 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.28 m² | 3.014 ft² |
| Effective Projective Area (EPA), lateral | 0.24 m² | 2.583 ft² |
| Wind Loading @ Velocity, frontal | 301.0 N @ 150 km/h (67.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 254.0 N @ 150 km/h (57.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 638.0 N @ 150 km/h (143.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 450 mm | 17.717 in |
| Depth, packed | 355 mm | 13.976 in |
| Length, packed | 1975 mm | 77.756 in |
| Weight, gross | 37.7 kg | 83.114 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 12 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Multi-RET) |
Dimensions
| Width | 350 mm | 13.78 in |
| Depth | 208 mm | 8.189 in |
| Length | 1828 mm | 71.969 in |
| Net Weight, without mounting kit | 26.5 kg | 58.422 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 798 MHz | 824 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–798 | 824–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain, dBi | 15.2 | 15.5 | 15.4 | 16.1 | 16.2 | 16.7 |
| Beamwidth, Horizontal, degrees | 68 | 65 | 63 | 63 | 65 | 65 |
| Beamwidth, Vertical, degrees | 11.7 | 10.3 | 11.3 | 10.4 | 9.8 | 8.9 |
| Beam Tilt, degrees | 2–14 | 2–14 | 2–14 | 2–14 | 2–14 | 2–14 |
| USLS (First Lobe), dB | 15 | 16 | 17 | 18 | 18 | 17 |
| Front-to-Back Ratio at 180°, dB | 29 | 31 | 30 | 33 | 32 | 34 |
| Isolation, Cross Polarization, dB | 28 | 28 | 28 | 28 | 28 | 28 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 | 350 | 350 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–798 | 824–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 14.9 | 15.3 | 15.3 | 15.8 | 15.9 | 16.4 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.3 | ±0.5 | ±0.4 | ±0.4 | ±0.4 |
| Gain by Beam Tilt, average, dBi | 2 ° | 14.9; 8 ° | 15.0;14 ° | 14.7 | 2 ° | 15.2; 8 ° | 15.4;14 ° | 15.2 | 2 ° | 15.3; 8 ° | 15.4;14 ° | 15.2 | 2 ° | 15.8; 8 ° | 15.8;14 ° | 15.7 | 2 ° | 15.8; 8 ° | 15.9;14 ° | 15.7 | 2 ° | 16.4; 8 ° | 16.4;14 ° | 16.3 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.7 | ±1.9 | ±3.4 | ±3 | ±4.0 | ±3.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±0.6 | ±0.7 | ±0.7 | ±0.6 | ±0.3 |
| USLS, beampeak to 20° above beampeak, dB | 15 | 16 | 17 | 18 | 18 | 17 |
| Front-to-Back Total Power at 180° ± 30°, dB | 24 | 23 | 25 | 27 | 25 | 27 |
| CPR at Boresight, dB | 18 | 20 | 18 | 20 | 21 | 23 |
| CPR at Sector, dB | 10 | 12 | 9 | 13 | 12 | 9 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.28 m² | 3.014 ft² |
| Effective Projective Area (EPA), lateral | 0.24 m² | 2.583 ft² |
| Wind Loading @ Velocity, frontal | 301.0 N @ 150 km/h (67.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 254.0 N @ 150 km/h (57.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 638.0 N @ 150 km/h (143.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 450 mm | 17.717 in |
| Depth, packed | 355 mm | 13.976 in |
| Length, packed | 1975 mm | 77.756 in |
| Weight, gross | 37.7 kg | 83.114 lb |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Structural Support, Tools & Accessories
-
![]()
BSAMNT-2F Mounting bracket for cylindrical pipe installations (60-115mm pipe diameter) for fix mechanical tilt applications.
Related Products
Antennas
-
![]()
BSAMNT-LW Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 2.8 in (60 - 70 mm) OD round members. Kit contains one tilt top bracket set and one bottom bracket set.
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Structural Support, Tools & Accessories
-
![]()
BSAMNT-LW Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 2.8 in (60 - 70 mm) OD round members. Kit contains one tilt top bracket set and one bottom bracket set.
-
![]()
BSAMNT-LW Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 2.8 in (60 - 70 mm) OD round members. Kit contains one tilt top bracket set and one bottom bracket set.
Included Products
Structural Support, Tools & Accessories
-
![]()
BSAMNT-2F Mounting bracket for cylindrical pipe installations (60-115mm pipe diameter) for fix mechanical tilt applications.
Related Products
Antennas
-
![]()
BSAMNT-LW Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 2.8 in (60 - 70 mm) OD round members. Kit contains one tilt top bracket set and one bottom bracket set.
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Structural Support, Tools & Accessories
-
![]()
BSAMNT-LW Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 2.8 in (60 - 70 mm) OD round members. Kit contains one tilt top bracket set and one bottom bracket set.
-
![]()
BSAMNT-LW Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 2.8 in (60 - 70 mm) OD round members. Kit contains one tilt top bracket set and one bottom bracket set.
Other Ways to Browse
