SBNHH-1D65B-SR
6-port sector antenna, 2x 698–896 and 4x 1695–2360 MHz, 65° HPBW, 2x RET. Both high bands share the same electrical tilt.
Specifications
Features and Benefits
- Interleaved dipole technology providing for attractive, low wind load mechanical package
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (1) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 1851 mm | 72.874 in |
| Net Weight, without mounting kit | 18.4 kg | 40.565 lb |
Array Layout
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain, dBi | 14.9 | 14.7 | 17.7 | 18.2 | 18.6 | 18.6 |
| Beamwidth, Horizontal, degrees | 68 | 66 | 69 | 66 | 63 | 58 |
| Beamwidth, Vertical, degrees | 12.1 | 10.7 | 5.6 | 5.2 | 5 | 4.5 |
| Beam Tilt, degrees | 0–14 | 0–14 | 0–7 | 0–7 | 0–7 | 0–7 |
| USLS (First Lobe), dB | 14 | 13 | 15 | 15 | 15 | 13 |
| Front-to-Back Ratio at 180°, dB | 27 | 29 | 28 | 28 | 28 | 27 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 | 350 | 350 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 14.5 | 14.3 | 17.4 | 17.9 | 18.2 | 18.3 |
| Gain by all Beam Tilts Tolerance, dB | ±0.5 | ±0.8 | ±0.4 | ±0.3 | ±0.5 | ±0.3 |
| Gain by Beam Tilt, average, dBi | 0 ° | 14.6 7 ° | 14.6 14 ° | 14.2 | 0 ° | 14.5 7 ° | 14.4 14 ° | 13.6 | 0 ° | 17.4 3 ° | 17.5 7 ° | 17.4 | 0 ° | 17.8 3 ° | 17.9 7 ° | 17.9 | 0 ° | 18.1 3 ° | 18.3 7 ° | 18.2 | 0 ° | 18.2 3 ° | 18.4 7 ° | 18.4 |
| Beamwidth, Horizontal Tolerance, degrees | ±2.2 | ±3.4 | ±2 | ±4.6 | ±5.7 | ±4.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±1 | ±0.3 | ±0.2 | ±0.3 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 16 | 14 | 16 | 16 | 16 | 15 |
| Front-to-Back Total Power at 180° ± 30°, dB | 25 | 26 | 27 | 26 | 26 | 26 |
| CPR at Boresight, dB | 22 | 23 | 21 | 20 | 20 | 22 |
| CPR at Sector, dB | 13 | 11 | 16 | 12 | 11 | 4 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.22 m² | 2.368 ft² | 0.27 m² | 2.906 ft² |
| Wind Loading @ Velocity, frontal | 283.0 N @ 150 km/h (63.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 234.0 N @ 150 km/h (52.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 545.0 N @ 150 km/h (122.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 287.0 N @ 150 km/h (64.5 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 390 mm | 15.354 in |
| Depth, packed | 296 mm | 11.654 in |
| Length, packed | 2025 mm | 79.724 in |
| Weight, gross | 31 kg | 68.343 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (1) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 1851 mm | 72.874 in |
| Net Weight, without mounting kit | 18.4 kg | 40.565 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain, dBi | 14.9 | 14.7 | 17.7 | 18.2 | 18.6 | 18.6 |
| Beamwidth, Horizontal, degrees | 68 | 66 | 69 | 66 | 63 | 58 |
| Beamwidth, Vertical, degrees | 12.1 | 10.7 | 5.6 | 5.2 | 5 | 4.5 |
| Beam Tilt, degrees | 0–14 | 0–14 | 0–7 | 0–7 | 0–7 | 0–7 |
| USLS (First Lobe), dB | 14 | 13 | 15 | 15 | 15 | 13 |
| Front-to-Back Ratio at 180°, dB | 27 | 29 | 28 | 28 | 28 | 27 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 | 350 | 350 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 14.5 | 14.3 | 17.4 | 17.9 | 18.2 | 18.3 |
| Gain by all Beam Tilts Tolerance, dB | ±0.5 | ±0.8 | ±0.4 | ±0.3 | ±0.5 | ±0.3 |
| Gain by Beam Tilt, average, dBi | 0 ° | 14.6; 7 ° | 14.6; 14 ° | 14.2 | 0 ° | 14.5; 7 ° | 14.4; 14 ° | 13.6 | 0 ° | 17.4; 3 ° | 17.5; 7 ° | 17.4 | 0 ° | 17.8; 3 ° | 17.9; 7 ° | 17.9 | 0 ° | 18.1; 3 ° | 18.3; 7 ° | 18.2 | 0 ° | 18.2; 3 ° | 18.4; 7 ° | 18.4 |
| Beamwidth, Horizontal Tolerance, degrees | ±2.2 | ±3.4 | ±2 | ±4.6 | ±5.7 | ±4.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±1 | ±0.3 | ±0.2 | ±0.3 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 16 | 14 | 16 | 16 | 16 | 15 |
| Front-to-Back Total Power at 180° ± 30°, dB | 25 | 26 | 27 | 26 | 26 | 26 |
| CPR at Boresight, dB | 22 | 23 | 21 | 20 | 20 | 22 |
| CPR at Sector, dB | 13 | 11 | 16 | 12 | 11 | 4 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.22 m² | 2.368 ft² | 0.27 m² | 2.906 ft² |
| Wind Loading @ Velocity, frontal | 283.0 N @ 150 km/h (63.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 234.0 N @ 150 km/h (52.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 545.0 N @ 150 km/h (122.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 287.0 N @ 150 km/h (64.5 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 390 mm | 15.354 in |
| Depth, packed | 296 mm | 11.654 in |
| Length, packed | 2025 mm | 79.724 in |
| Weight, gross | 31 kg | 68.343 lb |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Other Ways to Browse
