223158-2
Standard Grounding Kit for 1/4 in and 3/8 in corrugated coaxial cable and elliptical waveguide 240 and 380
Specifications
Product Classification
| Product Type | Grounding kit |
| Ordering Note | CommScope® standard product in Mexico, Central America, and South America |
General Specifications
| Bonding Conductor Jacketing Material | PVC |
| Bonding Conductor Material | Copper |
| Bonding Conductor Wire Size | 6 gauge |
| Cable Type | Corrugated | Elliptical waveguide |
| Color | Black |
| Grounding Kit Type | Standard Grounding Kits |
| Grounding Strap Material | Copper |
| Lug Attachment | Factory attached |
| Lug Type | Two-hole lug |
| Thread Size | 3/8 in |
Dimensions
| Bonding Conductor Length | 609.6 mm | 24 in |
| Cable Jacketing Removal Length, maximum | 58.42 mm | 2.3 in |
| Cable Jacketing Removal Length, minimum | 55.88 mm | 2.2 in |
| Compatible Diameter, maximum | 9.652 mm | 0.38 in |
| Compatible Diameter, minimum | 6.223 mm | 0.245 in |
| Nominal Size | 1/4 in | 3/8 in |
| Waveguide Size | WR28 | WG22 | R320 | WR42 | WG20 | R220 |
Electrical Specifications
| Current Handling | Tested to withstand 100,000 amps peak current surge |
| Current Handling Test Method | MIL-STD-1757 |
| Grounding, Bonding and Shielding Test Method | MIL-STD-188-124A |
| Lightning Protection Test Method | IEC 1024-1 |
Material Specifications
| Rivet Material | Copper |
Environmental Specifications
| Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Storage Temperature | -40 °C to +80 °C (-40 °F to +176 °F) |
| Blowing Rain Test Method | MIL-STD-810, Method 506 |
| Corrosion Test Method | MIL-STD-1344, Method 1001 |
| Freezing Rain/Icing Test Method | MIL-STD-810, Method 521 |
| Humidity Test Method | MIL-STD-1344, Method 1002 |
| Immersion Test Method | IEC 60529:2001, IP68 |
| UV Resistance Test Method | MIL-STD-810, Method 505 |
| Vibration Test Method | MIL-STD-202, Method 214 |
| Weatherproofing Method | Butyl and electric tape |
Packaging and Weights
| Height, packed | 254 mm | 10 in |
| Width, packed | 152.4 mm | 6 in |
| Length, packed | 50.8 mm | 2 in |
| Included | Grounding kit | Hardware | Lug | One roll of 2-1/2 in butyl rubber tape | One roll of 3/4 in PVC tape |
| Packaging quantity | 1 |
| Weight, gross | 0.26 kg | 0.573 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
Product Classification
| Product Type | Grounding kit |
| Ordering Note | CommScope® standard product in Mexico, Central America, and South America |
General Specifications
| Bonding Conductor Jacketing Material | PVC |
| Bonding Conductor Material | Copper |
| Bonding Conductor Wire Size | 6 gauge |
| Cable Type | Corrugated | Elliptical waveguide |
| Color | Black |
| Grounding Kit Type | Standard Grounding Kits |
| Grounding Strap Material | Copper |
| Lug Attachment | Factory attached |
| Lug Type | Two-hole lug |
| Thread Size | 3/8 in |
Dimensions
| Bonding Conductor Length | 609.6 mm | 24 in |
| Cable Jacketing Removal Length, maximum | 58.42 mm | 2.3 in |
| Cable Jacketing Removal Length, minimum | 55.88 mm | 2.2 in |
| Compatible Diameter, maximum | 9.652 mm | 0.38 in |
| Compatible Diameter, minimum | 6.223 mm | 0.245 in |
| Nominal Size | 1/4 in | 3/8 in |
| Waveguide Size | WR28 | WG22 | R320 | WR42 | WG20 | R220 |
Electrical Specifications
| Current Handling | Tested to withstand 100,000 amps peak current surge |
| Current Handling Test Method | MIL-STD-1757 |
| Grounding, Bonding and Shielding Test Method | MIL-STD-188-124A |
| Lightning Protection Test Method | IEC 1024-1 |
Material Specifications
| Rivet Material | Copper |
Environmental Specifications
| Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Storage Temperature | -40 °C to +80 °C (-40 °F to +176 °F) |
| Blowing Rain Test Method | MIL-STD-810, Method 506 |
| Corrosion Test Method | MIL-STD-1344, Method 1001 |
| Freezing Rain/Icing Test Method | MIL-STD-810, Method 521 |
| Humidity Test Method | MIL-STD-1344, Method 1002 |
| Immersion Test Method | IEC 60529:2001, IP68 |
| UV Resistance Test Method | MIL-STD-810, Method 505 |
| Vibration Test Method | MIL-STD-202, Method 214 |
| Weatherproofing Method | Butyl and electric tape |
Packaging and Weights
| Height, packed | 254 mm | 10 in |
| Width, packed | 152.4 mm | 6 in |
| Length, packed | 50.8 mm | 2 in |
| Included | Grounding kit | Hardware | Lug | One roll of 2-1/2 in butyl rubber tape | One roll of 3/4 in PVC tape |
| Packaging quantity | 1 |
| Weight, gross | 0.26 kg | 0.573 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
|
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
Documentation & Downloads
Installation Instruction
Ordering Guide
Product Compliance Documentation
Product Specification
Product Specification (Comprehensive)
Technical Publication
Warranty
Installation Instruction
Ordering Guide
Product Compliance Documentation
Product Specification
Product Specification (Comprehensive)
Technical Publication
Warranty
Related Products and Accessories
Included Products
Structural Support, Tools & Accessories
Related Products
Antennas
-
![]()
EW240 EW240, HELIAX® Standard Elliptical Waveguide, 24.0–26.5 GHz, black PE jacket
Cable Assemblies
-
![]()
1.135 Dual Band Bias Tee Surge Arrestor, 806–960 MHz and 1700–2170 MHz, with interface types DIN Female and DIN Male -
![]()
ABT-DMDF-ADB Dual Band Bias Tee Surge Arrestor, 806–960 MHz and 1700–2170 MHz, with interface types DIN Male and DIN Female -
![]()
ABT-DMDF-ADBH Dual Band Bias Tee Surge Arrestor, 698–960 MHz and 1700–2170 MHz, with interface types DIN Male and DIN Female -
![]()
ABT-NFNM-DB Dual Band Bias Tee Surge Arrestor (Cylindrical), 698-2700 MHz, with interface types N Female and N Male
-
![]()
APT-BDFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Female -
![]()
APT-BDFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Male -
![]()
APT-DFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped) with interface types DIN Female and DIN Female -
![]()
APT-DFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female and DIN Male -
![]()
APT-NFNF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 800–2170 MHz, with interface types N Female and N Female -
![]()
APT-NFNM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 806–2170 MHz, with interface types N Female and N Male
Cables
-
![]()
EW240 EW240, HELIAX® Standard Elliptical Waveguide, 24.0–26.5 GHz, black PE jacket
-
![]()
35422-23 Heat Treated LDF2-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
35422-33 Heat Treated FSJ1-50A, HELIAX® Superflexible Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE Jacket -
![]()
35422-42 Heat Treated FSJ2-50, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
35422-50 Heat Treated LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
35422-75 Heat Treated FSJ1RK-50B, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/4 in, black non-halogenated, fire retardant polyolefin jacket -
![]()
EFX2-50 EFX2-50, HELIAX® Extraflexible Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
EFX2RN-50 EFX2-50, HELIAX® Extraflexible Foam Coaxial Cable, corrugated copper, 3/8 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
FSJ1-50A FSJ1-50A, HELIAX® Superflexible Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
FSJ1-75 FSJ1-75, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
FSJ1RN-50B FSJ1-50B, HELIAX® Superflexible Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
FSJ1RN-75A FSJ1-75A, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/4 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
FSJ2-50 FSJ2-50, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
FSJ2RN-50 FSJ2-50, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 3/8 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
LDF1-50 LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
LDF1-50-43 LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
LDF1RN-50 LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
LDF2-50 LDF2-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
LDF2RN-50 LDF2-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 3/8 in, gray non-halogenated, fire retardant polyolefin jacket
Structural Support, Tools & Accessories
-
![]()
UGBA-34 Universal Ground Bar Assembly, three four-position ground bars, for 7-16 DIN, type N, or bolt-grounded surge arrestors -
![]()
UGBA-36 Universal Ground Bar Assembly, three six-position ground bars, for 7-16 DIN, type N, or bolt-grounded surge arrestors -
![]()
UGBA-DIN-34 Universal Ground Bar Assembly, three four-position ground bars, for 7-16 DIN or bolt-grounded surge arrestors -
![]()
UGBA-DIN-36 Universal Ground Bar Assembly, three six-position ground bars, for 7-16 DIN or bolt-grounded surge arrestors -
![]()
UGBKIT Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 19-1/2 in (6.4 mm x 63.5 mm x 495.3 mm) -
![]()
UGBKIT-0210 Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0210-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0212 Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0212-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0214 Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0214-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0412 Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0412-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0414 Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0414-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0420 Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0420-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0424 Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-0424-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-2 Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-2T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 19-1/2 in (6.4 mm x 63.5 mm x 495.3 mm)
-
![]()
GND-1M Ground Lead with Lugs, 1.08 meter
Included Products
Structural Support, Tools & Accessories
Related Products
Antennas
-
![]()
EW240 EW240, HELIAX® Standard Elliptical Waveguide, 24.0–26.5 GHz, black PE jacket
Cable Assemblies
-
![]()
1.135 Dual Band Bias Tee Surge Arrestor, 806–960 MHz and 1700–2170 MHz, with interface types DIN Female and DIN Male -
![]()
ABT-DMDF-ADB Dual Band Bias Tee Surge Arrestor, 806–960 MHz and 1700–2170 MHz, with interface types DIN Male and DIN Female -
![]()
ABT-DMDF-ADBH Dual Band Bias Tee Surge Arrestor, 698–960 MHz and 1700–2170 MHz, with interface types DIN Male and DIN Female -
![]()
ABT-NFNM-DB Dual Band Bias Tee Surge Arrestor (Cylindrical), 698-2700 MHz, with interface types N Female and N Male
-
![]()
APT-BDFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Female -
![]()
APT-BDFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Male -
![]()
APT-DFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped) with interface types DIN Female and DIN Female -
![]()
APT-DFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female and DIN Male -
![]()
APT-NFNF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 800–2170 MHz, with interface types N Female and N Female -
![]()
APT-NFNM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 806–2170 MHz, with interface types N Female and N Male
Cables
-
![]()
EW240 EW240, HELIAX® Standard Elliptical Waveguide, 24.0–26.5 GHz, black PE jacket
-
![]()
35422-23 Heat Treated LDF2-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
35422-33 Heat Treated FSJ1-50A, HELIAX® Superflexible Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE Jacket -
![]()
35422-42 Heat Treated FSJ2-50, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
35422-50 Heat Treated LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
35422-75 Heat Treated FSJ1RK-50B, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/4 in, black non-halogenated, fire retardant polyolefin jacket -
![]()
EFX2-50 EFX2-50, HELIAX® Extraflexible Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
EFX2RN-50 EFX2-50, HELIAX® Extraflexible Foam Coaxial Cable, corrugated copper, 3/8 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
FSJ1-50A FSJ1-50A, HELIAX® Superflexible Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
FSJ1-75 FSJ1-75, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
FSJ1RN-50B FSJ1-50B, HELIAX® Superflexible Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
FSJ1RN-75A FSJ1-75A, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/4 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
FSJ2-50 FSJ2-50, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
FSJ2RN-50 FSJ2-50, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 3/8 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
LDF1-50 LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
LDF1-50-43 LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket -
![]()
LDF1RN-50 LDF1-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, gray non-halogenated, fire retardant polyolefin jacket -
![]()
LDF2-50 LDF2-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacket -
![]()
LDF2RN-50 LDF2-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 3/8 in, gray non-halogenated, fire retardant polyolefin jacket
Structural Support, Tools & Accessories
-
![]()
UGBA-34 Universal Ground Bar Assembly, three four-position ground bars, for 7-16 DIN, type N, or bolt-grounded surge arrestors -
![]()
UGBA-36 Universal Ground Bar Assembly, three six-position ground bars, for 7-16 DIN, type N, or bolt-grounded surge arrestors -
![]()
UGBA-DIN-34 Universal Ground Bar Assembly, three four-position ground bars, for 7-16 DIN or bolt-grounded surge arrestors -
![]()
UGBA-DIN-36 Universal Ground Bar Assembly, three six-position ground bars, for 7-16 DIN or bolt-grounded surge arrestors -
![]()
UGBKIT Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 19-1/2 in (6.4 mm x 63.5 mm x 495.3 mm) -
![]()
UGBKIT-0210 Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0210-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0212 Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0212-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0214 Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0214-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0412 Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0412-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0414 Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0414-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0420 Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0420-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0424 Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-0424-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-2 Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-2T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 19-1/2 in (6.4 mm x 63.5 mm x 495.3 mm)
-
![]()
GND-1M Ground Lead with Lugs, 1.08 meter
Other Ways to Browse
