Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

3X-RVV-65A-R9

18-port sector antenna, 6x694-960 and 12x1695–2690 MHz, 65° HPBW, 9xRET.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Features a multiband tri-sectors antenna built under one radome
  • Each sector offers one low band DualPol® array and two mid band DualPol® arrays with independent Electrical Tilt
  • Fully integrated flange mounting system for ease of installation
  • Aesthetically pleasing concealment solution for tough zoning areas
  • Pole mounting kit not included. Separate pole mounting kit TS-MNT-TOP-370 available for pole diameter from 150mm (5.9 inch) to 273 mm (10.7 inch). Please check Optional Mounting Kits section for more details

General Specifications

Antenna Type DualPol® tri-sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 12
RF Connector Quantity, low band 6
RF Connector Quantity, total 18

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 3 female | 3 male
Input Voltage 10–30 Vdc
Internal RET Low band (3) | Mid band (6)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Length 1446 mm | 56.929 in
Net Weight, antenna only 35.2 kg | 77.603 lb
Outer Diameter 370 mm | 14.567 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications

R1,R2,R3 R1,R2,R3 R1,R2,R3 Y1-Y6 Y1-Y6 Y1-Y6
Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2690
RF Port 1-6 1-6 1-6 7-18 7-18 7-18
Gain, dBi 14.0 14.4 14.7 17.2 18.0 18.1
Beamwidth, Horizontal, degrees 75 75 74 62 59 59
Beamwidth, Vertical, degrees 15.3 13.7 12.6 7 6.2 5.2
Beam Tilt, degrees 3–18 3–18 3–18 2–12 2–12 2–12
USLS (First Lobe), dB 14 17 20 19 18 18
Front-to-Back Ratio at 180°, dB 33 32 29 31 35 32
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 13.7 14.1 14.4 16.8 17.5 17.7
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.4 ±0.5 ±0.6 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±2 ±2 ±2 ±4 ±3 ±5
Beamwidth, Vertical Tolerance, degrees ±1.2 ±0.9 ±0.9 ±0.4 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 20 17 16 14
Front-to-Back Total Power at 180° ± 30°, dB 19 21 23 26 27 24
CPR at Boresight, dB 21 22 24 21 21 22
CPR at Sector, dB 13 11 17 7 7 9

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.3 m² | 3.229 ft²
Effective Projective Area (EPA), lateral 0.3 m² | 3.229 ft²
Wind Loading @ Velocity, frontal 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 478 mm | 18.819 in
Depth, packed 464 mm | 18.268 in
Length, packed 1784 mm | 70.236 in
Weight, gross 41.8 kg | 92.153 lb

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type DualPol® tri-sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 12
RF Connector Quantity, low band 6
RF Connector Quantity, total 18

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 3 female | 3 male
Input Voltage 10–30 Vdc
Internal RET Low band (3) | Mid band (6)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Length 1446 mm | 56.929 in
Net Weight, antenna only 35.2 kg | 77.603 lb
Outer Diameter 370 mm | 14.567 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications

R1,R2,R3 R1,R2,R3 R1,R2,R3 Y1-Y6 Y1-Y6 Y1-Y6
Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2690
RF Port 1-6 1-6 1-6 7-18 7-18 7-18
Gain, dBi 14.0 14.4 14.7 17.2 18.0 18.1
Beamwidth, Horizontal, degrees 75 75 74 62 59 59
Beamwidth, Vertical, degrees 15.3 13.7 12.6 7 6.2 5.2
Beam Tilt, degrees 3–18 3–18 3–18 2–12 2–12 2–12
USLS (First Lobe), dB 14 17 20 19 18 18
Front-to-Back Ratio at 180°, dB 33 32 29 31 35 32
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 13.7 14.1 14.4 16.8 17.5 17.7
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.4 ±0.5 ±0.6 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±2 ±2 ±2 ±4 ±3 ±5
Beamwidth, Vertical Tolerance, degrees ±1.2 ±0.9 ±0.9 ±0.4 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 20 17 16 14
Front-to-Back Total Power at 180° ± 30°, dB 19 21 23 26 27 24
CPR at Boresight, dB 21 22 24 21 21 22
CPR at Sector, dB 13 11 17 7 7 9

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.3 m² | 3.229 ft²
Effective Projective Area (EPA), lateral 0.3 m² | 3.229 ft²
Wind Loading @ Velocity, frontal 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 478 mm | 18.819 in
Depth, packed 464 mm | 18.268 in
Length, packed 1784 mm | 70.236 in
Weight, gross 41.8 kg | 92.153 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification