1. Início
  2. Tipo de rede
  3. Áreas de macro cell externas
  4. Antenas para estação rádio base e equipamentos RET
  5. Antenas para estação rádio base
  6. Antenas setoriais
  7. RV4S4-65A-R6
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RV4S4-65A-R6

18-port sector antenna, 2x 698–960, 8x 1695-2690 and 8x 3300–3800 MHz, 65° HPBW, 6x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Beam-forming weighting table available upon request
  • M-LOC cluster connector for 3.3-3.8GHz, equipped with calibration port
  • Provide a future-ready antenna solution with flexibility to reassign antenna, support 2T2R at 698-960MHz, 4T4R at 1695-2690MHz, and 8T8R at 3300-3800MHz
  • Combination of FDD MIMO antenna and 3.5GHz 8T8R TDD beam forming antenna, all in one for 5G ready
  • Retractable tilt indicator rods

General Specifications

Antenna Type Sector
Band Multiband
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, low band 2
RF Connector Quantity, total 18

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (5) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 1600 mm | 62.992 in
Net Weight, without mounting kit 28.6 kg | 63.052 lb
TDD Column Spacing 42 mm | 1.654 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1695 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R1 Y1-Y4 Y1-Y4 Y1-Y4 P1 P1
Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain, dBi 14.9 14.9 15.4 16.1 16.2 15.0 15.1
Beamwidth, Horizontal, degrees 67 69 67 64 65 93 87
Beamwidth, Vertical, degrees 13.1 11.4 11.1 10.1 8.6 7.2 6.7
Beam Tilt, degrees 2–16 2–16 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 18 15 17 19 14 14
Front-to-Back Ratio at 180°, dB 36 32 31 31 30 33 33
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -140 -140
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 75 75

Electrical Specifications, BASTA

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain by all Beam Tilts, average, dBi 14.6 14.6 14.9 15.7 15.7 14.5 14.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±1 ±0.7 ±0.8 ±0.7 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 14.7
9 ° | 14.8
16 ° | 14.3		 2 ° | 14.7
9 ° | 14.8
16 ° | 14.3		 2 ° | 14.9
7 ° | 14.9
12 ° | 14.8		 2 ° | 15.8
7 ° | 15.7
12 ° | 15.5		 2 ° | 16.0
7 ° | 15.8
12 ° | 15.4		 2 ° | 14.4
7 ° | 14.6
12 ° | 14.5		 2 ° | 14.4
7 ° | 14.9
12 ° | 14.8
Beamwidth, Horizontal Tolerance, degrees ±2 ±4.1 ±5.9 ±7.3 ±9.4 ±19.8 ±14.4
Beamwidth, Vertical Tolerance, degrees ±1.3 ±0.7 ±0.7 ±0.7 ±0.6 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 20 19 15 17 16 13 14
Front-to-Back Total Power at 180° ± 30°, dB 25 24 23 24 25 26 25
CPR at Boresight, dB 26 20 19 22 21 15 15
CPR at Sector, dB 10 8 8 7 7 8 7

Electrical Specifications, Broadcast 65

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain, dBi 16.0 16.1
Beamwidth, Horizontal, degrees 60 61
Beamwidth, Horizontal Tolerance, degrees ±4.7 ±3.3

Electrical Specifications, Service Beam

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Steered 0° Gain, dBi 19.2 19.4
Steered 0° Gain Tolerance, dBi ±0.4 ±0.5
Steered 0° Beamwidth, Horizontal, degrees 27 26
Steered 30° Gain, dBi 18.8 18.9
Steered 30° Gain Tolerance, dBi ±0.4 ±0.6
Steered 30° Beamwidth, Horizontal, degrees 28 27

Electrical Specifications, Soft Split

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain, dBi 18.7 19.2
Beamwidth, Horizontal, degrees 32 28
CPR at Beampeak, dB 18 15
Horizontal Sidelobe, dB 15 15

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.29 m² | 3.122 ft²
Effective Projective Area (EPA), lateral 0.21 m² | 2.26 ft²
Mechanical Tilt Range 0°–18°
Wind Loading @ Velocity, frontal 312.0 N @ 150 km/h (70.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 226.0 N @ 150 km/h (50.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 533.0 N @ 150 km/h (119.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 1733 mm | 68.228 in
Weight, gross 39.4 kg | 86.862 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, low band 2
RF Connector Quantity, total 18

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (5) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 1600 mm | 62.992 in
Net Weight, without mounting kit 28.6 kg | 63.052 lb
TDD Column Spacing 42 mm | 1.654 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1695 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R1 Y1-Y4 Y1-Y4 Y1-Y4 P1 P1
Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain, dBi 14.9 14.9 15.4 16.1 16.2 15.0 15.1
Beamwidth, Horizontal, degrees 67 69 67 64 65 93 87
Beamwidth, Vertical, degrees 13.1 11.4 11.1 10.1 8.6 7.2 6.7
Beam Tilt, degrees 2–16 2–16 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 18 15 17 19 14 14
Front-to-Back Ratio at 180°, dB 36 32 31 31 30 33 33
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -140 -140
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 75 75

Electrical Specifications, BASTA

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain by all Beam Tilts, average, dBi 14.6 14.6 14.9 15.7 15.7 14.5 14.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±1 ±0.7 ±0.8 ±0.7 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 14.7; 9 ° | 14.8;16 ° | 14.3 2 ° | 14.7; 9 ° | 14.8;16 ° | 14.3 2 ° | 14.9; 7 ° | 14.9;12 ° | 14.8 2 ° | 15.8; 7 ° | 15.7;12 ° | 15.5 2 ° | 16.0; 7 ° | 15.8;12 ° | 15.4 2 ° | 14.4; 7 ° | 14.6;12 ° | 14.5 2 ° | 14.4; 7 ° | 14.9;12 ° | 14.8
Beamwidth, Horizontal Tolerance, degrees ±2 ±4.1 ±5.9 ±7.3 ±9.4 ±19.8 ±14.4
Beamwidth, Vertical Tolerance, degrees ±1.3 ±0.7 ±0.7 ±0.7 ±0.6 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 20 19 15 17 16 13 14
Front-to-Back Total Power at 180° ± 30°, dB 25 24 23 24 25 26 25
CPR at Boresight, dB 26 20 19 22 21 15 15
CPR at Sector, dB 10 8 8 7 7 8 7

Electrical Specifications, Broadcast 65

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain, dBi 16.0 16.1
Beamwidth, Horizontal, degrees 60 61
Beamwidth, Horizontal Tolerance, degrees ±4.7 ±3.3

Electrical Specifications, Service Beam

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Steered 0° Gain, dBi 19.2 19.4
Steered 0° Gain Tolerance, dBi ±0.4 ±0.5
Steered 0° Beamwidth, Horizontal, degrees 27 26
Steered 30° Gain, dBi 18.8 18.9
Steered 30° Gain Tolerance, dBi ±0.4 ±0.6
Steered 30° Beamwidth, Horizontal, degrees 28 27

Electrical Specifications, Soft Split

Frequency Band, MHz 698–890 890–960 1695–1920 1920–2200 2300–2690 3300–3600 3600–3800
Gain, dBi 18.7 19.2
Beamwidth, Horizontal, degrees 32 28
CPR at Beampeak, dB 18 15
Horizontal Sidelobe, dB 15 15

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.29 m² | 3.122 ft²
Effective Projective Area (EPA), lateral 0.21 m² | 2.26 ft²
Mechanical Tilt Range 0°–18°
Wind Loading @ Velocity, frontal 312.0 N @ 150 km/h (70.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 226.0 N @ 150 km/h (50.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 533.0 N @ 150 km/h (119.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 319.0 N @ 150 km/h (71.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 1733 mm | 68.228 in
Weight, gross 39.4 kg | 86.862 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

RV4S4-65A-R6 Line Drawing

Installation Instruction

639840 Mounting Kits For Wide Panel Antennas

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

RV4S4-65A-R6 Product specifications
RV4S4-65A-R6 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty

Assembly Drawing

RV4S4-65A-R6 Line Drawing

Installation Instruction

639840 Mounting Kits For Wide Panel Antennas

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

RV4S4-65A-R6 Product specifications
RV4S4-65A-R6 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty