For other alternatives, please contact us for more information.

0 Alternative products available

NNH4S4-65D-R7

20-port sector antenna, 4x 698–896, 8x 1695–2360 MHz, 65° HPBW and 8x 3400-4000 MHz, 90° HPBW, 7x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Multi-band FDD antenna featuring C-Band 8T8R functionality
The C-band RET is factory set to AISG2. All other RET are assigned to AISG1
Feature the same dimensions as existing 8 and 12-port FDD capable antennas
New endcap designs provide improved wind loading performance

Specifications

General Specifications

Antenna Type	Sector- and beamforming
Band	Multiband
Calibration Connector Interface	4.3-10 Female
Calibration Connector Quantity	1
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	20

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	High band (1) \| Low band (2) \| Mid band (4)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width	498 mm \| 19.606 in
Depth	197 mm \| 7.756 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	57 kg \| 125.663 lb
TDD Column Spacing	41 mm \| 1.614 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2360 MHz \| 3400 – 4000 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi	15.8	16.5	16.4	17.2	17.8	18.0	16.4	16.6
Beamwidth, Horizontal, degrees	70	63	73	66	61	58	86	73
Beamwidth, Vertical, degrees	8.8	7.8	6.1	5.8	5.5	5	6.1	5.8
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12	2–12	0–10	0–10
USLS (First Lobe), dB	16	16	16	17	17	17	15	15
Front-to-Back Ratio at 180°, dB	29	29	33	31	31	33	28	29
Coupling level, Amp, Antenna port to Cal port, dB							26	26
Coupling level, max Amp Δ, Antenna port to Cal port, dB							±2	±2
Coupler, max Amp Δ, Antenna port to Cal port, dB							0.9	0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees							7	7
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25	25	25
Isolation, Co-polarization, dB							19	19
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-145	-145
Input Power per Port at 50°C, maximum, watts	300	300	250	250	250	250	75	75

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain by all Beam Tilts, average, dBi	15.6	16.2	15.8	16.8	17.3	17.7	15.6	15.9
Gain by all Beam Tilts Tolerance, dB	±0.6	±0.3	±0.8	±0.6	±0.8	±0.6	±0.9	±0.8
Beamwidth, Horizontal Tolerance, degrees	±4.7	±3.6	±7.5	±7.8	±7.2	±3.2	±3.4	±2.2
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.4	±0.3	±0.4	±0.3	±0.4	±0.4
USLS, beampeak to 20° above beampeak, dB	15	14	14	16	15	16	13	12
Front-to-Back Total Power at 180° ± 30°, dB	23	24	25	24	26	27	21	21
CPR at Boresight, dB	25	28	21	24	24	21	14	14
CPR at Sector, dB	13	11	8	5	5	8	6	6

Electrical Specifications, Broadcast 65

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi							18.0	18.7
Beamwidth, Horizontal, degrees							73	65
Beamwidth, Vertical, degrees							6.1	5.8
Front-to-Back Total Power at 180° ± 30°, dB							24	25
USLS (First Lobe), dB							16	17

Electrical Specifications, Envelope Pattern

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi							21.0	21.2

Electrical Specifications, Service Beam

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Steered 0° Gain, dBi							20.8	21.1
Steered 0° Beamwidth, Horizontal, degrees							25	26
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB							30	30
Steered 0° Horizontal Sidelobe, dB							14	14
Steered 0° USLS (First Lobe), dB							17	17
Steered 30° Gain, dBi							19.8	20.5
Steered 30° Beamwidth, Horizontal, degrees							30	25
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB							26	27

Electrical Specifications, Soft Split

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi							19.8	20.2
Beamwidth, Horizontal, degrees							30	27
Front-to-Back Total Power at 180° ± 30°, dB							27	27
Horizontal Sidelobe, dB							15	15
USLS (First Lobe), dB							16	16

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.91 m² \| 9.795 ft²
Effective Projective Area (EPA), lateral	0.29 m² \| 3.122 ft²
Wind Loading @ Velocity, frontal	970.0 N @ 150 km/h (218.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	304.0 N @ 150 km/h (68.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,162.0 N @ 150 km/h (261.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	667.0 N @ 150 km/h (149.9 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	565 mm \| 22.244 in
Depth, packed	368 mm \| 14.488 in
Length, packed	2874 mm \| 113.150 in
Weight, gross	78.9 kg \| 173.945 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

General Specifications

Antenna Type	Sector- and beamforming
Band	Multiband
Calibration Connector Interface	4.3-10 Female
Calibration Connector Quantity	1
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	20

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	High band (1) \| Low band (2) \| Mid band (4)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width	498 mm \| 19.606 in
Depth	197 mm \| 7.756 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	57 kg \| 125.663 lb
TDD Column Spacing	41 mm \| 1.614 in

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2360 MHz \| 3400 – 4000 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi	15.8	16.5	16.4	17.2	17.8	18.0	16.4	16.6
Beamwidth, Horizontal, degrees	70	63	73	66	61	58	86	73
Beamwidth, Vertical, degrees	8.8	7.8	6.1	5.8	5.5	5	6.1	5.8
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12	2–12	0–10	0–10
USLS (First Lobe), dB	16	16	16	17	17	17	15	15
Front-to-Back Ratio at 180°, dB	29	29	33	31	31	33	28	29
Coupling level, Amp, Antenna port to Cal port, dB							26	26
Coupling level, max Amp Δ, Antenna port to Cal port, dB							±2	±2
Coupler, max Amp Δ, Antenna port to Cal port, dB							0.9	0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees							7	7
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25	25	25
Isolation, Co-polarization, dB							19	19
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-145	-145
Input Power per Port at 50°C, maximum, watts	300	300	250	250	250	250	75	75

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain by all Beam Tilts, average, dBi	15.6	16.2	15.8	16.8	17.3	17.7	15.6	15.9
Gain by all Beam Tilts Tolerance, dB	±0.6	±0.3	±0.8	±0.6	±0.8	±0.6	±0.9	±0.8
Beamwidth, Horizontal Tolerance, degrees	±4.7	±3.6	±7.5	±7.8	±7.2	±3.2	±3.4	±2.2
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.4	±0.3	±0.4	±0.3	±0.4	±0.4
USLS, beampeak to 20° above beampeak, dB	15	14	14	16	15	16	13	12
Front-to-Back Total Power at 180° ± 30°, dB	23	24	25	24	26	27	21	21
CPR at Boresight, dB	25	28	21	24	24	21	14	14
CPR at Sector, dB	13	11	8	5	5	8	6	6

Electrical Specifications, Broadcast 65

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi							18.0	18.7
Beamwidth, Horizontal, degrees							73	65
Beamwidth, Vertical, degrees							6.1	5.8
Front-to-Back Total Power at 180° ± 30°, dB							24	25
USLS (First Lobe), dB							16	17

Electrical Specifications, Envelope Pattern

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi							21.0	21.2

Electrical Specifications, Service Beam

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Steered 0° Gain, dBi							20.8	21.1
Steered 0° Beamwidth, Horizontal, degrees							25	26
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB							30	30
Steered 0° Horizontal Sidelobe, dB							14	14
Steered 0° USLS (First Lobe), dB							17	17
Steered 30° Gain, dBi							19.8	20.5
Steered 30° Beamwidth, Horizontal, degrees							30	25
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB							26	27

Electrical Specifications, Soft Split

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3400–3800	3700–4000
Gain, dBi							19.8	20.2
Beamwidth, Horizontal, degrees							30	27
Front-to-Back Total Power at 180° ± 30°, dB							27	27
Horizontal Sidelobe, dB							15	15
USLS (First Lobe), dB							16	16

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.91 m² \| 9.795 ft²
Effective Projective Area (EPA), lateral	0.29 m² \| 3.122 ft²
Wind Loading @ Velocity, frontal	970.0 N @ 150 km/h (218.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	304.0 N @ 150 km/h (68.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,162.0 N @ 150 km/h (261.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	667.0 N @ 150 km/h (149.9 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	565 mm \| 22.244 in
Depth, packed	368 mm \| 14.488 in
Length, packed	2874 mm \| 113.150 in
Weight, gross	78.9 kg \| 173.945 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted