SBNH-1D65C-SR
4-port sector antenna, 2x 698-896 and 2x 1710-2360 MHz, 65° HPBW, 2x RET
Specifications
Features and Benefits
- Interleaved dipole technology providing for attractive, low wind load mechanical package
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 2 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (1) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2451 mm | 96.496 in |
| Net Weight, without mounting kit | 22.5 kg | 49.604 lb |
Array Layout
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1710 – 2360 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–806 | 806–896 | 1710–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain, dBi | 16.1 | 15.6 | 17.6 | 17.8 | 18.3 | 18.3 |
| Beamwidth, Horizontal, degrees | 66 | 64 | 71 | 65 | 63 | 58 |
| Beamwidth, Vertical, degrees | 8.8 | 7.8 | 5.7 | 5.2 | 5 | 4.4 |
| Beam Tilt, degrees | 0–11 | 0–11 | 0–7 | 0–7 | 0–7 | 0–7 |
| USLS (First Lobe), dB | 13 | 12 | 16 | 15 | 17 | 18 |
| Front-to-Back Ratio at 180°, dB | 30 | 34 | 32 | 29 | 28 | 31 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 400 | 400 | 350 | 350 | 350 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 1710–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 15.8 | 15.3 | 17.3 | 17.7 | 18.0 | 18.1 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.7 | ±0.4 | ±0.3 | ±0.5 | ±0.3 |
| Gain by Beam Tilt, average, dBi | 0 ° | 15.7 5 ° | 15.9 11 ° | 15.6 | 0 ° | 15.3 5 ° | 15.4 11 ° | 15.0 | 0 ° | 17.3 4 ° | 17.3 7 ° | 17.2 | 0 ° | 17.6 4 ° | 17.8 7 ° | 17.6 | 0 ° | 17.9 4 ° | 18.0 7 ° | 18.0 | 0 ° | 18.0 4 ° | 18.2 7 ° | 18.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.2 | ±2.2 | ±3.7 | ±4.3 | ±3.2 | ±3.5 |
| Beamwidth, Vertical Tolerance, degrees | ±0.6 | ±0.6 | ±0.3 | ±0.2 | ±0.3 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 13 | 11 | 16 | 15 | 16 | 15 |
| Front-to-Back Total Power at 180° ± 30°, dB | 25 | 23 | 27 | 25 | 25 | 26 |
| CPR at Boresight, dB | 30 | 25 | 18 | 19 | 18 | 22 |
| CPR at Sector, dB | 15 | 11 | 15 | 12 | 11 | 5 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 395.0 N @ 150 km/h (88.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 332.0 N @ 150 km/h (74.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 761.0 N @ 150 km/h (171.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 400.0 N @ 150 km/h (89.9 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 409 mm | 16.102 in |
| Depth, packed | 299 mm | 11.772 in |
| Length, packed | 2572 mm | 101.26 in |
| Weight, gross | 35.2 kg | 77.603 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 2 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (1) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2451 mm | 96.496 in |
| Net Weight, without mounting kit | 22.5 kg | 49.604 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1710 – 2360 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–806 | 806–896 | 1710–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain, dBi | 16.1 | 15.6 | 17.6 | 17.8 | 18.3 | 18.3 |
| Beamwidth, Horizontal, degrees | 66 | 64 | 71 | 65 | 63 | 58 |
| Beamwidth, Vertical, degrees | 8.8 | 7.8 | 5.7 | 5.2 | 5 | 4.4 |
| Beam Tilt, degrees | 0–11 | 0–11 | 0–7 | 0–7 | 0–7 | 0–7 |
| USLS (First Lobe), dB | 13 | 12 | 16 | 15 | 17 | 18 |
| Front-to-Back Ratio at 180°, dB | 30 | 34 | 32 | 29 | 28 | 31 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 400 | 400 | 350 | 350 | 350 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 1710–1880 | 1850–1990 | 1920–2200 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 15.8 | 15.3 | 17.3 | 17.7 | 18.0 | 18.1 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.7 | ±0.4 | ±0.3 | ±0.5 | ±0.3 |
| Gain by Beam Tilt, average, dBi | 0 ° | 15.7; 5 ° | 15.9; 11 ° | 15.6 | 0 ° | 15.3; 5 ° | 15.4; 11 ° | 15.0 | 0 ° | 17.3; 4 ° | 17.3; 7 ° | 17.2 | 0 ° | 17.6; 4 ° | 17.8; 7 ° | 17.6 | 0 ° | 17.9; 4 ° | 18.0; 7 ° | 18.0 | 0 ° | 18.0; 4 ° | 18.2; 7 ° | 18.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.2 | ±2.2 | ±3.7 | ±4.3 | ±3.2 | ±3.5 |
| Beamwidth, Vertical Tolerance, degrees | ±0.6 | ±0.6 | ±0.3 | ±0.2 | ±0.3 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 13 | 11 | 16 | 15 | 16 | 15 |
| Front-to-Back Total Power at 180° ± 30°, dB | 25 | 23 | 27 | 25 | 25 | 26 |
| CPR at Boresight, dB | 30 | 25 | 18 | 19 | 18 | 22 |
| CPR at Sector, dB | 15 | 11 | 15 | 12 | 11 | 5 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 395.0 N @ 150 km/h (88.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 332.0 N @ 150 km/h (74.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 761.0 N @ 150 km/h (171.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 400.0 N @ 150 km/h (89.9 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 409 mm | 16.102 in |
| Depth, packed | 299 mm | 11.772 in |
| Length, packed | 2572 mm | 101.26 in |
| Weight, gross | 35.2 kg | 77.603 lb |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Other Ways to Browse
