VVSSP-65S-R1BV2-V4
10-port small cell antenna, 4x 1695–2690, 4x 3300-4200 and 2x 5150-5925 MHz. 65° HPBW, Internal RET and SBT
Specifications
General Specifications
| Antenna Type | Small Cell |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | PVC, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 10 |
| RF Connector Quantity, total | 10 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Male |
| RET Interface, quantity | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal Bias Tee | Port 1 |
| Internal RET | High band (1) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 1 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 307 mm | 12.087 in |
| Depth | 118 mm | 4.646 in |
| Length | 600 mm | 23.622 in |
| Net Weight, without mounting kit | 6.9 kg | 15.212 lb |
5 GHz Port Power Table
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1695 – 2690 MHz | 3300 – 4200 MHz | 5150 – 5925 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 440 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 1695–1920 | 1920–2180 | 2300–2690 | 3300–3550 | 3550–3700 | 3700–4200 | 5150–5925 |
| Gain, dBi | 12.5 | 12.9 | 13.5 | 10.4 | 10.1 | 10.3 | 4.1 |
| Beamwidth, Horizontal, degrees | 74 | 75 | 68 | 67 | 75 | 69 | 61 |
| Beamwidth, Vertical, degrees | 20.5 | 18.3 | 15.9 | 35.8 | 32.8 | 33.1 | 25.4 |
| Beam Tilt, degrees | 2–10 | 2–10 | 2–10 | 7 | 7 | 7 | 4 |
| USLS (First Lobe), dB | 14 | 16 | 15 | 15 | 14 | 14 | |
| Front-to-Back Ratio at 180°, dB | 26 | 24 | 29 | 28 | 28 | 25 | 29 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -150 | -140 | -140 | -140 | |
| Input Power per Port at 50°C, maximum, watts | 75 | 75 | 75 | 35 | 35 | 35 | 5 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 1695–1920 | 1920–2180 | 2300–2690 | 3300–3550 | 3550–3700 | 3700–4200 | 5150–5925 |
| Gain by all Beam Tilts, average, dBi | 12.2 | 12.4 | 13.0 | 10.0 | 9.7 | 9.9 | 3.1 |
| Gain by all Beam Tilts Tolerance, dB | ±0.6 | ±0.5 | ±0.6 | ±0.6 | ±0.6 | ±0.6 | ±1.9 |
| Gain by Beam Tilt, average, dBi | 2 ° | 11.9 6 ° | 12.310 ° | 12.4 | 2 ° | 12.1 6 ° | 12.410 ° | 12.6 | 2 ° | 12.6 6 ° | 13.110 ° | 13.3 | ||||
| Beamwidth, Horizontal Tolerance, degrees | ±6.5 | ±7.4 | ±5.7 | ±6.6 | ±7.5 | ±9.4 | ±12.3 |
| Beamwidth, Vertical Tolerance, degrees | ±2.6 | ±1.8 | ±1.7 | ±3.2 | ±3.3 | ±4.1 | ±2.6 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 20 | 24 | 19 | 17 | 20 | 21 |
| CPR at Boresight, dB | 19 | 15 | 15 | 18 | 14 | 15 | 10 |
| CPR at Sector, dB | 12 | 10 | 7 | 5 | 5 | 5 | 0 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 198.0 N @ 150 km/h (44.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 37.0 N @ 150 km/h (8.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 240.0 N @ 150 km/h (54.0 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 404 mm | 15.906 in |
| Depth, packed | 276 mm | 10.866 in |
| Length, packed | 772 mm | 30.394 in |
| Weight, gross | 9.4 kg | 20.723 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
General Specifications
| Antenna Type | Small Cell |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | PVC, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 10 |
| RF Connector Quantity, total | 10 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Male |
| RET Interface, quantity | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal Bias Tee | Port 1 |
| Internal RET | High band (1) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 1 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 307 mm | 12.087 in |
| Depth | 118 mm | 4.646 in |
| Length | 600 mm | 23.622 in |
| Net Weight, without mounting kit | 6.9 kg | 15.212 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1695 – 2690 MHz | 3300 – 4200 MHz | 5150 – 5925 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 440 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 1695–1920 | 1920–2180 | 2300–2690 | 3300–3550 | 3550–3700 | 3700–4200 | 5150–5925 |
| Gain, dBi | 12.5 | 12.9 | 13.5 | 10.4 | 10.1 | 10.3 | 4.1 |
| Beamwidth, Horizontal, degrees | 74 | 75 | 68 | 67 | 75 | 69 | 61 |
| Beamwidth, Vertical, degrees | 20.5 | 18.3 | 15.9 | 35.8 | 32.8 | 33.1 | 25.4 |
| Beam Tilt, degrees | 2–10 | 2–10 | 2–10 | 7 | 7 | 7 | 4 |
| USLS (First Lobe), dB | 14 | 16 | 15 | 15 | 14 | 14 | |
| Front-to-Back Ratio at 180°, dB | 26 | 24 | 29 | 28 | 28 | 25 | 29 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -150 | -140 | -140 | -140 | |
| Input Power per Port at 50°C, maximum, watts | 75 | 75 | 75 | 35 | 35 | 35 | 5 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 1695–1920 | 1920–2180 | 2300–2690 | 3300–3550 | 3550–3700 | 3700–4200 | 5150–5925 |
| Gain by all Beam Tilts, average, dBi | 12.2 | 12.4 | 13.0 | 10.0 | 9.7 | 9.9 | 3.1 |
| Gain by all Beam Tilts Tolerance, dB | ±0.6 | ±0.5 | ±0.6 | ±0.6 | ±0.6 | ±0.6 | ±1.9 |
| Gain by Beam Tilt, average, dBi | 2 ° | 11.9; 6 ° | 12.3;10 ° | 12.4 | 2 ° | 12.1; 6 ° | 12.4;10 ° | 12.6 | 2 ° | 12.6; 6 ° | 13.1;10 ° | 13.3 | ||||
| Beamwidth, Horizontal Tolerance, degrees | ±6.5 | ±7.4 | ±5.7 | ±6.6 | ±7.5 | ±9.4 | ±12.3 |
| Beamwidth, Vertical Tolerance, degrees | ±2.6 | ±1.8 | ±1.7 | ±3.2 | ±3.3 | ±4.1 | ±2.6 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 20 | 24 | 19 | 17 | 20 | 21 |
| CPR at Boresight, dB | 19 | 15 | 15 | 18 | 14 | 15 | 10 |
| CPR at Sector, dB | 12 | 10 | 7 | 5 | 5 | 5 | 0 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 198.0 N @ 150 km/h (44.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 37.0 N @ 150 km/h (8.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 240.0 N @ 150 km/h (54.0 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 404 mm | 15.906 in |
| Depth, packed | 276 mm | 10.866 in |
| Length, packed | 772 mm | 30.394 in |
| Weight, gross | 9.4 kg | 20.723 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Other Ways to Browse
