For other alternatives, please contact us for more information.

0 Alternative products available

884016994/10 | CS31CM BLU C6 4/23 U/UTP RIB 305M

Base Product: CS31CM

Available in:
Asia

CS31CM Category 6 U/UTP Cable, non-plenum, blue jacket, 4 pair count, 1000 ft (305 m) length reel-in-box

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Specifications

Product Classification

Regional Availability	Asia
Portfolio	NETCONNECT®
Product Type	Twisted pair cable
Ordering Note	Available in Asia Pacific

General Specifications

Product Number	CS31CM
ANSI/TIA Category	6
Cable Component Type	Horizontal
Cable Type	U/UTP (unshielded)
Conductor Type, singles	Solid
Conductors, quantity	8
Jacket Color	Blue
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Supported Application	1000BASE-T \| 1000BASE-TX \| 100BASE-TX \| 10BASE-T \| 155Mbps ATM \| TP-PMD \| Token Ring \| VoIP
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| IEC 61156-5 \| ISO/IEC 11801 Class E

Dimensions

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	0.980 mm \| 0.0386 in
Diameter Over Jacket, nominal	5.751 mm \| 0.2264 in
Conductor Gauge, singles	23 AWG

Cross Section Drawing

Click on image to enlarge.

Electrical Specifications

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	68 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Propagation Delay, maximum	536 ns/100m @250MHz
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Electrical Cable Performance

CommScope

Std

Refers to the standard value listed under Transmission Standards in the Electrical Specifications above

Typ

Typical

Insertion Loss (dB/100m)

Near End Crosstalk (dB/100m)

ACR

Attenuation to Crosstalk Ratio (dB/100m))

PSNEXT

Power Sum Near End Crosstalk (db/100m)

PSACR

Power Sum Attenuation to Crosstalk Ratio (dB/100m)

ACRF

Attenuation to Crosstalk Ratio - Far End (dB/100m)

PSACRF

Insertion Loss (dB/100m)

Return Loss (dB)

Frequency	IL, CS	IL, STD	NEXT, CS	NEXT, STD	ACR, CS	ACR, STD	PSNEXT, CS	PSNEXT, STD	PSACR, CS	PSACR, STD	ACRF, CS	ACRF, STD	PSACRF, CS	PSACRF, STD	RL, CS	RL, STD	TCL, CS	TCL, STD	ELTCTL, CS	ELTCTL, STD
1.00 MHz	2.0	2.0	75.3	74.3	73.3	72.3	72.3	72.3	70.3	70.3	68.0	67.8	65.0	64.8	20.0	20.0	40.0	40.0	35.0	35.0
4.00 MHz	3.8	3.8	66.3	65.3	62.5	61.5	63.3	63.3	59.5	59.5	56.0	55.8	53.0	52.8	23.0	23.0	40.0	40.0	23.0	23.0
8.00 MHz	5.3	5.3	61.8	60.8	56.4	55.4	58.8	58.8	53.4	53.4	49.9	49.7	46.9	46.7	24.5	24.5	40.0	40.0	16.9	16.9
10.00 MHz	6.0	6.0	60.3	59.3	54.3	53.3	57.3	57.3	51.3	51.3	48.0	47.8	45.0	44.8	25.0	25.0	40.0	40.0	15.0	15.0
16.00 MHz	7.6	7.6	57.2	56.2	49.7	48.7	54.2	54.2	46.7	46.7	43.9	43.7	40.9	40.7	25.0	25.0	38.0	38.0	10.9
20.00 MHz	8.5	8.5	55.8	54.8	47.3	46.3	52.8	52.8	44.3	44.3	42.0	41.8	39.0	38.8	25.0	25.0	37.0	37.0	9.0	9.0
25.00 MHz	9.5	9.5	54.3	53.3	44.8	43.8	51.3	51.3	41.8	41.8	40.0	39.8	37.0	36.8	24.3	24.3	36.0	36.0	7.0	7.0
31.25 MHz	10.7	10.7	52.9	51.9	41.2	41.2	49.9	49.9	39.2	39.2	38.1	37.9	35.1	34.9	23.6	23.6	35.1	35.1
62.50 MHz	15.4	15.4	48.4	47.4	33.0	32.0	45.4	45.4	30.0	30.0	32.1	31.9	29.1	28.9	21.5	21.5	32.0	32.0
100.00 MHz	19.8	19.8	45.3	44.3	25.5	24.5	42.3	42.3	22.5	22.5	28.0	27.8	25.0	24.8	20.1	20.1	30.0	30.0
155.00 MHz	25.2	25.2	42.4	41.4	17.3	16.3	39.4	39.4	14.3	14.3	24.2	24.0	21.2	21.0	18.8	18.8	28.1	28.1
200.00 MHz	29.0	29.0	40.8	39.8	11.8	10.8	37.8	37.8	8.8	8.8	22.0	21.8	19.0	18.8	18.0	18.0	27.0	27.0
250.00 MHz	32.8	32.8	39.3	38.3	6.5	5.5	36.3	36.3	3.5	3.5	20.0	19.8	17.0	16.8	17.3	17.3	26.0	26.0

Material Specifications

Conductor Material	Bare copper
Insulation Material	Polyolefin
Jacket Material	PVC
Separator Material	Polyolefin

Mechanical Specifications

Minimum Bend Radius Note	4 times the outer cable diameter
Pulling Tension, maximum	11.34 kg \| 25 lb
Transportation Vibration Standard	ISTA-1A

Environmental Specifications

Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Storage Temperature	-20 °C to +80 °C (-4 °F to +176 °F)
Environmental Space	Non-plenum
Flame Test Method	CM

Packaging and Weights

Cable weight	38.543 kg/km \| 25.9 lb/kft
Packaging Type	CommPak® box

Regulatory Compliance/Certifications

Agency	Classification
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant

Product Classification

Regional Availability	Asia
Portfolio	NETCONNECT®
Product Type	Twisted pair cable
Ordering Note	Available in Asia Pacific

General Specifications

Product Number	CS31CM
ANSI/TIA Category	6
Cable Component Type	Horizontal
Cable Type	U/UTP (unshielded)
Conductor Type, singles	Solid
Conductors, quantity	8
Jacket Color	Blue
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Supported Application	1000BASE-T \| 1000BASE-TX \| 100BASE-TX \| 10BASE-T \| 155Mbps ATM \| TP-PMD \| Token Ring \| VoIP
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| IEC 61156-5 \| ISO/IEC 11801 Class E

Dimensions

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	0.980 mm \| 0.0386 in
Diameter Over Jacket, nominal	5.751 mm \| 0.2264 in
Conductor Gauge, singles	23 AWG

Electrical Specifications

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	68 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Propagation Delay, maximum	536 ns/100m @250MHz
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Electrical Cable Performance

CommScope

Std

Refers to the standard value listed under Transmission Standards in the Electrical Specifications above

Typ

Typical

Insertion Loss (dB/100m)

Near End Crosstalk (dB/100m)

ACR

Attenuation to Crosstalk Ratio (dB/100m))

PSNEXT

Power Sum Near End Crosstalk (db/100m)

PSACR

Power Sum Attenuation to Crosstalk Ratio (dB/100m)

ACRF

Attenuation to Crosstalk Ratio - Far End (dB/100m)

PSACRF

Insertion Loss (dB/100m)

Return Loss (dB)

Frequency	IL, CS	IL, STD	NEXT, CS	NEXT, STD	ACR, CS	ACR, STD	PSNEXT, CS	PSNEXT, STD	PSACR, CS	PSACR, STD	ACRF, CS	ACRF, STD	PSACRF, CS	PSACRF, STD	RL, CS	RL, STD	TCL, CS	TCL, STD	ELTCTL, CS	ELTCTL, STD
1.00 MHz	2.0	2.0	75.3	74.3	73.3	72.3	72.3	72.3	70.3	70.3	68.0	67.8	65.0	64.8	20.0	20.0	40.0	40.0	35.0	35.0
4.00 MHz	3.8	3.8	66.3	65.3	62.5	61.5	63.3	63.3	59.5	59.5	56.0	55.8	53.0	52.8	23.0	23.0	40.0	40.0	23.0	23.0
8.00 MHz	5.3	5.3	61.8	60.8	56.4	55.4	58.8	58.8	53.4	53.4	49.9	49.7	46.9	46.7	24.5	24.5	40.0	40.0	16.9	16.9
10.00 MHz	6.0	6.0	60.3	59.3	54.3	53.3	57.3	57.3	51.3	51.3	48.0	47.8	45.0	44.8	25.0	25.0	40.0	40.0	15.0	15.0
16.00 MHz	7.6	7.6	57.2	56.2	49.7	48.7	54.2	54.2	46.7	46.7	43.9	43.7	40.9	40.7	25.0	25.0	38.0	38.0	10.9
20.00 MHz	8.5	8.5	55.8	54.8	47.3	46.3	52.8	52.8	44.3	44.3	42.0	41.8	39.0	38.8	25.0	25.0	37.0	37.0	9.0	9.0
25.00 MHz	9.5	9.5	54.3	53.3	44.8	43.8	51.3	51.3	41.8	41.8	40.0	39.8	37.0	36.8	24.3	24.3	36.0	36.0	7.0	7.0
31.25 MHz	10.7	10.7	52.9	51.9	41.2	41.2	49.9	49.9	39.2	39.2	38.1	37.9	35.1	34.9	23.6	23.6	35.1	35.1
62.50 MHz	15.4	15.4	48.4	47.4	33.0	32.0	45.4	45.4	30.0	30.0	32.1	31.9	29.1	28.9	21.5	21.5	32.0	32.0
100.00 MHz	19.8	19.8	45.3	44.3	25.5	24.5	42.3	42.3	22.5	22.5	28.0	27.8	25.0	24.8	20.1	20.1	30.0	30.0
155.00 MHz	25.2	25.2	42.4	41.4	17.3	16.3	39.4	39.4	14.3	14.3	24.2	24.0	21.2	21.0	18.8	18.8	28.1	28.1
200.00 MHz	29.0	29.0	40.8	39.8	11.8	10.8	37.8	37.8	8.8	8.8	22.0	21.8	19.0	18.8	18.0	18.0	27.0	27.0
250.00 MHz	32.8	32.8	39.3	38.3	6.5	5.5	36.3	36.3	3.5	3.5	20.0	19.8	17.0	16.8	17.3	17.3	26.0	26.0

Material Specifications

Conductor Material	Bare copper
Insulation Material	Polyolefin
Jacket Material	PVC
Separator Material	Polyolefin

Mechanical Specifications

Minimum Bend Radius Note	4 times the outer cable diameter
Pulling Tension, maximum	11.34 kg \| 25 lb
Transportation Vibration Standard	ISTA-1A

Environmental Specifications

Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Storage Temperature	-20 °C to +80 °C (-4 °F to +176 °F)
Environmental Space	Non-plenum
Flame Test Method	CM

Packaging and Weights

Cable weight	38.543 kg/km \| 25.9 lb/kft
Packaging Type	CommPak® box

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant