Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRZZVVT4S4-65BR8V4

28-port sector antenna, 4x 694-960, 4x 1427-2690 and 4x 1695-2690 MHz 65° HPBW, 8x 2300-2690 and 8x 3300-3800MHz, 90° HPBW, 8x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Also includes 1x 4-Column Array for 2300-2690 MHz and a separate 1x 4-Column Array for 3300-3800MHz. Column spacing optimized to support Soft Split Beamforming
  • Includes eight Internal RET’s
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
  • New end cap shape for additional wind load reduction
  • 2x MQ4 and 2x MQ5 cluster connectors (comprising 16 RF ports + 2 calibration ports in total) are provided for the beam-forming arrays

General Specifications

Antenna Type Sector and beamforming
Band Multiband
Calibration Connector Interface MQ5
Calibration Connector Quantity 2
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 28

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2180 mm | 85.827 in
Net Weight, without mounting kit 48 kg | 105.822 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz | 2300 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 1,900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Gain, dBi 15.1 15.5 15.7 14.7 16.3 17.2 15.7 16.8 15.2 16.0
Beamwidth, Horizontal, degrees 70 63 61 82 68 63 73 58 91 90
Beamwidth, Vertical, degrees 10.3 9.4 8.6 10.1 7.9 5.9 8.9 7 5.6 6.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 18 20 15 16 17 16 18 17 17
Front-to-Back Ratio at 180°, dB 31 29 29 31 29 33 31 30 31 30
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 25 25 25 25 25 25 25
Isolation, Co-polarization, dB 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150 -130 -130
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 200 250 200 150 75

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Gain, dBi 17.6 18.0
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 5.7 6.3
Front-to-Back Total Power at 180° ± 30°, dB 27 27
USLS (First Lobe), dB 18 21

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Steered 0° Gain, dBi 20.3 20.8
Steered 0° Beamwidth, Horizontal, degrees 25 24
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 31 30
Steered 0° Horizontal Sidelobe, dB 14 13
Steered 30° Gain, dBi 19.3 20.1
Steered 30° Beamwidth, Horizontal, degrees 29 27
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 28 28

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Gain, dBi 19.2 20.0
Beamwidth, Horizontal, degrees 33 31
Front-to-Back Total Power at 180° ± 30°, dB 30 28
Horizontal Sidelobe, dB 17 17

Mechanical Specifications

Wind Loading @ Velocity, frontal 760.0 N @ 150 km/h (170.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 233.0 N @ 150 km/h (52.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 911.0 N @ 150 km/h (204.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 523.0 N @ 150 km/h (117.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2359 mm | 92.874 in
Weight, gross 61.9 kg | 136.466 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector and beamforming
Band Multiband
Calibration Connector Interface MQ5
Calibration Connector Quantity 2
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 28

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2180 mm | 85.827 in
Net Weight, without mounting kit 48 kg | 105.822 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz | 2300 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 1,900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Gain, dBi 15.1 15.5 15.7 14.7 16.3 17.2 15.7 16.8 15.2 16.0
Beamwidth, Horizontal, degrees 70 63 61 82 68 63 73 58 91 90
Beamwidth, Vertical, degrees 10.3 9.4 8.6 10.1 7.9 5.9 8.9 7 5.6 6.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 18 20 15 16 17 16 18 17 17
Front-to-Back Ratio at 180°, dB 31 29 29 31 29 33 31 30 31 30
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 25 25 25 25 25 25 25
Isolation, Co-polarization, dB 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150 -130 -130
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 200 250 200 150 75

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Gain, dBi 17.6 18.0
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 5.7 6.3
Front-to-Back Total Power at 180° ± 30°, dB 27 27
USLS (First Lobe), dB 18 21

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Steered 0° Gain, dBi 20.3 20.8
Steered 0° Beamwidth, Horizontal, degrees 25 24
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 31 30
Steered 0° Horizontal Sidelobe, dB 14 13
Steered 30° Gain, dBi 19.3 20.1
Steered 30° Beamwidth, Horizontal, degrees 29 27
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 28 28

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2180 2300–2690 1695–2180 2300–2690 2300–2690 3300–3800
Gain, dBi 19.2 20.0
Beamwidth, Horizontal, degrees 33 31
Front-to-Back Total Power at 180° ± 30°, dB 30 28
Horizontal Sidelobe, dB 17 17

Mechanical Specifications

Wind Loading @ Velocity, frontal 760.0 N @ 150 km/h (170.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 233.0 N @ 150 km/h (52.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 911.0 N @ 150 km/h (204.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 523.0 N @ 150 km/h (117.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2359 mm | 92.874 in
Weight, gross 61.9 kg | 136.466 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification