Bend Insensitive Multimode Fiber Adds Little Value to Enterprise Network Performance

What is the advantage of Bend-insensitive multimode fiber, or BIMFF? It has seen a big marketing push recently and it is a bit difficult to understand why. Although fiber has always had a minimum bend radius, bending issues are rarely seen as a major concern from end users in the data center or enterprise spaces. Is it prudent to jump into this new technology?

Bend-insensitive multimode fiber, or BIMFF, has seen a big marketing push recently and it is a bit difficult to understand why. Although fiber has always had a minimum bend radius, I have rarely seen bending issues as a top concern from end users in the data center or enterprise spaces. Their concerns tend to focus more on actual system performance – network speeds, maximum distances, allowed connector pairs within a link, etc.

In the enterprise, the cable trays, conduits, patch cord trays, slack storage spools, and rack management systems are all specifically designed to limit bend radii or mitigate deployment stress and error. Therefore the value of BIMMF is as assurance against the unplanned mishap and abuse of the media, not as a solution to address everyday occurrences.

The following table lists out some of the important performance requirements and the limited effect of BIMMF.

Today there are no standards around BIMMF and there are concerns about compatibility between BIMMF and traditional fibers, as well as between BIMMFs from different manufacturers. There are also questions around bandwidth measurements in the factory, actual performance in the fields, and changes to field testing that may be required.

It might be best to wait for this technology to mature before jumping in.