For other alternatives, please contact us for more information.

0 Alternative products available

UN874028404/10 | CS34P BLK C6 4/23 F/UTP RL 1KFT

Base Product: CS34P

Available in:
North America

CS34P Category 6 F/UTP Cable, plenum, black jacket, 4 pair count, 1000 ft (305 m) length, reel

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Specifications

Product Classification

Regional Availability	North America
Portfolio	Uniprise®
Product Type	Twisted pair cable

General Specifications

Product Number	CS34P
ANSI/TIA Category	6
Cable Component Type	Horizontal
Cable Type	F/UTP (shielded)
Conductor Type, singles	Solid
Conductors, quantity	8
Drain Wire Type	Solid
Jacket Color	Black
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| ISO/IEC 11801 Class E

Dimensions

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	1.080 mm \| 0.0425 in
Diameter Over Jacket, nominal	6.934 mm \| 0.273 in
Jacket Thickness	0.457 mm \| 0.018 in
Conductor Gauge, singles	23 AWG
Drain Wire Gauge	26 AWG

Cross Section Drawing

Click on image to enlarge.

Electrical Specifications

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	71 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating	300 V

Electrical Cable Performance

CommScope

Std

Refers to the standard value listed under Transmission Standards in the Electrical Specifications above

Typ

Typical

Insertion Loss (dB/100m)

Near End Crosstalk (dB/100m)

ACR

Attenuation to Crosstalk Ratio (dB/100m))

PSNEXT

Power Sum Near End Crosstalk (db/100m)

PSACR

Power Sum Attenuation to Crosstalk Ratio (dB/100m)

ACRF

Attenuation to Crosstalk Ratio - Far End (dB/100m)

PSACRF

Insertion Loss (dB/100m)

Return Loss (dB)

Frequency	IL, STD	IL, TYP	NEXT, STD	NEXT, TYP	ACR, STD	ACR, TYP	PSNEXT, STD	PSNEXT, TYP	PSACR, STD	PSACR, TYP	ACRF, STD	ACRF, TYP	PSACRF, STD	PSACRF, TYP	RL, STD	RL, TYP
1.00 MHz	2.0	1.8	74.3	85.6	72.3	83.8	72.3	83.0	70.3	81.2	67.8	85.5	64.8	82.8	20.0	34.1
4.00 MHz	3.8	3.4	65.3	79.2	61.5	75.8	63.3	76.9	59.5	73.5	55.8	78.2	52.8	76.5	23.0	35.0
8.00 MHz	5.3	4.8	60.8	73.8	55.4	69.0	58.8	71.6	53.4	66.8	49.7	72.7	46.7	70.9	24.5	35.9
10.00 MHz	6.0	5.4	59.3	72.5	53.3	67.1	57.3	70.4	51.3	65.0	47.8	70.8	44.8	69.0	25.0	36.6
16.00 MHz	7.6	6.9	56.2	69.0	48.7	62.1	54.2	66.9	46.7	60.1	43.7	67.0	40.7	65.0	25.0	37.2
20.00 MHz	8.5	7.7	54.8	67.4	46.3	59.7	52.8	65.3	44.3	57.6	41.8	65.2	38.8	63.2	25.0	37.1
25.00 MHz	9.5	8.6	53.3	65.7	43.8	57.1	51.3	63.6	41.8	55.0	39.8	63.4	36.8	61.3	24.3	35.5
31.25 MHz	10.7	9.6	51.9	64.4	41.2	54.7	49.9	62.3	39.2	52.7	37.9	61.5	34.9	59.4	23.6	35.6
62.50 MHz	15.4	13.7	47.4	59.6	32.0	45.8	45.4	57.4	30.0	43.7	31.9	55.3	28.9	53.0	21.5	31.8
100.00 MHz	19.8	17.5	44.3	55.8	24.5	38.3	42.3	53.8	22.5	36.2	27.8	51.2	24.8	49.0	20.1	28.1
155.00 MHz	25.2	22.0	41.4	52.0	16.3	30.0	39.4	50.1	14.3	28.1	24.0	47.7	21.0	45.4	18.8	24.8
200.00 MHz	29.0	25.1	39.8	49.4	10.8	24.2	37.8	47.7	8.8	22.6	21.8	45.0	18.8	42.9	18.0	23.1
250.00 MHz	32.8	28.3	38.3	49.2	5.5	20.9	36.3	47.3	3.5	19.0	19.8	43.6	16.8	41.2	17.3	21.7
300.00 MHz		31.1		47.7		16.6		45.9		14.8		41.5		39.3		20.5
350.00 MHz		33.8		46.1		12.3		44.3		10.5		39.7		37.6		19.6
400.00 MHz		36.3		44.7		8.4		42.8		6.5		38.5		36.2		19.0
500.00 MHz		41.0		42.3		1.2		40.4		-0.7		36.3		33.9		17.6
550.00 MHz		43.2		41.0		-2.2		38.9		-4.3		34.1		31.8		15.9
650.00 MHz		47.3		34.5		-12.8		33.1		-14.2		32.0		29.6		15.6

Material Specifications

Conductor Material	Bare copper
Drain Wire Material	Tinned copper
Insulation Material	FEP
Jacket Material	PVC
Separator Material	FEP
Shield (Tape) Material	Aluminum/Polyester

Mechanical Specifications

Pulling Tension, maximum

11.34 kg | 25 lb

Environmental Specifications

Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Environmental Space	Plenum
Flame Test Method	CMP/FT6 \| NEC Article 800 \| NFPA 262 \| UL 444 \| UL 910
Smoke Test Method	CMP/FT6

Packaging and Weights

Cable weight	56847.863 kg/km \| 38200 lb/kft
Packaging Type	Reel

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant

Product Classification

Regional Availability	North America
Portfolio	Uniprise®
Product Type	Twisted pair cable

General Specifications

Product Number	CS34P
ANSI/TIA Category	6
Cable Component Type	Horizontal
Cable Type	F/UTP (shielded)
Conductor Type, singles	Solid
Conductors, quantity	8
Drain Wire Type	Solid
Jacket Color	Black
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| ISO/IEC 11801 Class E

Dimensions

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	1.080 mm \| 0.0425 in
Diameter Over Jacket, nominal	6.934 mm \| 0.273 in
Jacket Thickness	0.457 mm \| 0.018 in
Conductor Gauge, singles	23 AWG
Drain Wire Gauge	26 AWG

Electrical Specifications

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	71 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating	300 V

Electrical Cable Performance

CommScope

Std

Refers to the standard value listed under Transmission Standards in the Electrical Specifications above

Typ

Typical

Insertion Loss (dB/100m)

Near End Crosstalk (dB/100m)

ACR

Attenuation to Crosstalk Ratio (dB/100m))

PSNEXT

Power Sum Near End Crosstalk (db/100m)

PSACR

Power Sum Attenuation to Crosstalk Ratio (dB/100m)

ACRF

Attenuation to Crosstalk Ratio - Far End (dB/100m)

PSACRF

Insertion Loss (dB/100m)

Return Loss (dB)

Frequency	IL, STD	IL, TYP	NEXT, STD	NEXT, TYP	ACR, STD	ACR, TYP	PSNEXT, STD	PSNEXT, TYP	PSACR, STD	PSACR, TYP	ACRF, STD	ACRF, TYP	PSACRF, STD	PSACRF, TYP	RL, STD	RL, TYP
1.00 MHz	2.0	1.8	74.3	85.6	72.3	83.8	72.3	83.0	70.3	81.2	67.8	85.5	64.8	82.8	20.0	34.1
4.00 MHz	3.8	3.4	65.3	79.2	61.5	75.8	63.3	76.9	59.5	73.5	55.8	78.2	52.8	76.5	23.0	35.0
8.00 MHz	5.3	4.8	60.8	73.8	55.4	69.0	58.8	71.6	53.4	66.8	49.7	72.7	46.7	70.9	24.5	35.9
10.00 MHz	6.0	5.4	59.3	72.5	53.3	67.1	57.3	70.4	51.3	65.0	47.8	70.8	44.8	69.0	25.0	36.6
16.00 MHz	7.6	6.9	56.2	69.0	48.7	62.1	54.2	66.9	46.7	60.1	43.7	67.0	40.7	65.0	25.0	37.2
20.00 MHz	8.5	7.7	54.8	67.4	46.3	59.7	52.8	65.3	44.3	57.6	41.8	65.2	38.8	63.2	25.0	37.1
25.00 MHz	9.5	8.6	53.3	65.7	43.8	57.1	51.3	63.6	41.8	55.0	39.8	63.4	36.8	61.3	24.3	35.5
31.25 MHz	10.7	9.6	51.9	64.4	41.2	54.7	49.9	62.3	39.2	52.7	37.9	61.5	34.9	59.4	23.6	35.6
62.50 MHz	15.4	13.7	47.4	59.6	32.0	45.8	45.4	57.4	30.0	43.7	31.9	55.3	28.9	53.0	21.5	31.8
100.00 MHz	19.8	17.5	44.3	55.8	24.5	38.3	42.3	53.8	22.5	36.2	27.8	51.2	24.8	49.0	20.1	28.1
155.00 MHz	25.2	22.0	41.4	52.0	16.3	30.0	39.4	50.1	14.3	28.1	24.0	47.7	21.0	45.4	18.8	24.8
200.00 MHz	29.0	25.1	39.8	49.4	10.8	24.2	37.8	47.7	8.8	22.6	21.8	45.0	18.8	42.9	18.0	23.1
250.00 MHz	32.8	28.3	38.3	49.2	5.5	20.9	36.3	47.3	3.5	19.0	19.8	43.6	16.8	41.2	17.3	21.7
300.00 MHz		31.1		47.7		16.6		45.9		14.8		41.5		39.3		20.5
350.00 MHz		33.8		46.1		12.3		44.3		10.5		39.7		37.6		19.6
400.00 MHz		36.3		44.7		8.4		42.8		6.5		38.5		36.2		19.0
500.00 MHz		41.0		42.3		1.2		40.4		-0.7		36.3		33.9		17.6
550.00 MHz		43.2		41.0		-2.2		38.9		-4.3		34.1		31.8		15.9
650.00 MHz		47.3		34.5		-12.8		33.1		-14.2		32.0		29.6		15.6

Material Specifications

Conductor Material	Bare copper
Drain Wire Material	Tinned copper
Insulation Material	FEP
Jacket Material	PVC
Separator Material	FEP
Shield (Tape) Material	Aluminum/Polyester

Mechanical Specifications

Pulling Tension, maximum

11.34 kg | 25 lb

Environmental Specifications

Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Environmental Space	Plenum
Flame Test Method	CMP/FT6 \| NEC Article 800 \| NFPA 262 \| UL 444 \| UL 910
Smoke Test Method	CMP/FT6

Packaging and Weights

Cable weight	56847.863 kg/km \| 38200 lb/kft
Packaging Type	Reel

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant