Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RVV-45A-R3

6-port sector antenna, 2x 694–960 and 4x 1695–2690 MHz, 45° HPBW, 3x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Narrow beamwidth capacity antenna for higher level of densification and enhanced data throughput

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 457 mm | 17.992 in
Depth 178 mm | 7.008 in
Length 1399 mm | 55.079 in
Net Weight, antenna only 26.1 kg | 57.541 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 550 W @ 50 °C
BASTA Version, electrical BASTA v12

Electrical Specifications

R1 R1 R1 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2690
RF Port 1,2 1,2 1,2 3-6 3-6 3-6
Gain, dBi 15.5 16.1 16.5 18.8 19.3 19.6
Beamwidth, Horizontal, degrees 47 44 40 45 40 34
Beamwidth, Vertical, degrees 17.4 15.6 14.5 6.9 6.3 5.4
Beam Tilt, degrees 2–18 2–18 2–18 2–12 2–12 2–12
USLS (First Lobe), dB 20 20 17 14 15 16
Front-to-Back Ratio at 180°, dB 30 32 31 37 36 36
Front-to-Back Total Power at 180° ± 30°, dB 22 21 22 28 29 26
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 159.0 N @ 150 km/h (35.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 608 mm | 23.937 in
Depth, packed 346 mm | 13.622 in
Length, packed 1542 mm | 60.709 in
Weight, gross 41.1 kg | 90.610 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 457 mm | 17.992 in
Depth 178 mm | 7.008 in
Length 1399 mm | 55.079 in
Net Weight, antenna only 26.1 kg | 57.541 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 550 W @ 50 °C
BASTA Version, electrical BASTA v12

Electrical Specifications

R1 R1 R1 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2690
RF Port 1,2 1,2 1,2 3-6 3-6 3-6
Gain, dBi 15.5 16.1 16.5 18.8 19.3 19.6
Beamwidth, Horizontal, degrees 47 44 40 45 40 34
Beamwidth, Vertical, degrees 17.4 15.6 14.5 6.9 6.3 5.4
Beam Tilt, degrees 2–18 2–18 2–18 2–12 2–12 2–12
USLS (First Lobe), dB 20 20 17 14 15 16
Front-to-Back Ratio at 180°, dB 30 32 31 37 36 36
Front-to-Back Total Power at 180° ± 30°, dB 22 21 22 28 29 26
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 159.0 N @ 150 km/h (35.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 608 mm | 23.937 in
Depth, packed 346 mm | 13.622 in
Length, packed 1542 mm | 60.709 in
Weight, gross 41.1 kg | 90.610 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification