Warning Icon
This product will be discontinued on: November 30, 2024

For other alternatives, please contact us for more information.

1 Replacement products available
  • RVV-65A-R3
    6-port sector antenna, 2x 694–960 and 4x 1695–2690 MHz, 65° HPBW, 3x RET

RVVPX306.11R-V2

6-port sector antenna, 2x 698–960 and 4x 1710–2690 MHz, 65° HPBW, 3x RET with manual override.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Brass | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 353 mm | 13.898 in
Depth 209 mm | 8.228 in
Length 1600 mm | 62.992 in
Net Weight, without mounting kit 23 kg | 50.706 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 14.1 14.8 14.9 17.2 17.6 18.2
Beamwidth, Horizontal, degrees 68 69 63 62 63 61
Beamwidth, Vertical, degrees 16.4 14.7 13.4 7.5 6.7 5.4
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Null Fill, dB -22 -22 -22
Front-to-Back Ratio at 180°, dB 25 24 25 29 32 30
CPR at Boresight, dB 16 12 13 20 17 15
CPR at Sector, dB 10 10 7 7 5 3
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 748.0 N @ 150 km/h (168.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 634.0 N @ 150 km/h (142.5 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 427 mm | 16.811 in
Depth, packed 325 mm | 12.795 in
Length, packed 1787 mm | 70.354 in
Weight, gross 40 kg | 88.185 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Brass | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 353 mm | 13.898 in
Depth 209 mm | 8.228 in
Length 1600 mm | 62.992 in
Net Weight, without mounting kit 23 kg | 50.706 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 14.1 14.8 14.9 17.2 17.6 18.2
Beamwidth, Horizontal, degrees 68 69 63 62 63 61
Beamwidth, Vertical, degrees 16.4 14.7 13.4 7.5 6.7 5.4
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Null Fill, dB -22 -22 -22
Front-to-Back Ratio at 180°, dB 25 24 25 29 32 30
CPR at Boresight, dB 16 12 13 20 17 15
CPR at Sector, dB 10 10 7 7 5 3
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 748.0 N @ 150 km/h (168.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 634.0 N @ 150 km/h (142.5 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 427 mm | 16.811 in
Depth, packed 325 mm | 12.795 in
Length, packed 1787 mm | 70.354 in
Weight, gross 40 kg | 88.185 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification