Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

T4-90A-R1-V6

Planar Array Antenna, 2300–2690 MHz, 90° HPBW, 1xIntRET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • For use in beamforming system, includes a calibration port
  • Planar array antenna – 4 columns
  • Single internal RET control for all four antenna arrays
  • Optimized for software defined split six sector applications

General Specifications

Antenna Type Sector and beamforming
Band Single band
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 14.2 kg | 31.306 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Beamwidth, Horizontal, degrees 95 86
Beamwidth, Vertical, degrees 5.1 4.8
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 19 18
Front-to-Back Ratio at 180°, dB 30 29
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 24 24
Isolation, Inter-band, dB 24 24
Isolation, Co-polarization, dB 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 150 150

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 5.1 4.7
Front-to-Back Total Power at 180° ± 30°, dB 29 29
USLS (First Lobe), dB 19 17

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 0° Gain, dBi 22.6 22.7
Steered 0° Beamwidth, Horizontal, degrees 26 25
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 34 34
Steered 0° USLS (First Lobe), dB 20 18
Steered 30° Gain, dBi 21.6 21.7
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 30 31

Electrical Specifications, Soft Split

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 21.3 21.3
Beamwidth, Horizontal, degrees 35 32
Front-to-Back Total Power at 180° ± 30°, dB 30 30
Horizontal Sidelobe, dB 17 17

Mechanical Specifications

Wind Loading @ Velocity, frontal 586.0 N @ 150 km/h (131.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 123.0 N @ 150 km/h (27.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 709.0 N @ 150 km/h (159.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.260 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 24.1 kg | 53.131 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector and beamforming
Band Single band
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 14.2 kg | 31.306 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Beamwidth, Horizontal, degrees 95 86
Beamwidth, Vertical, degrees 5.1 4.8
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 19 18
Front-to-Back Ratio at 180°, dB 30 29
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 24 24
Isolation, Inter-band, dB 24 24
Isolation, Co-polarization, dB 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 150 150

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 5.1 4.7
Front-to-Back Total Power at 180° ± 30°, dB 29 29
USLS (First Lobe), dB 19 17

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 0° Gain, dBi 22.6 22.7
Steered 0° Beamwidth, Horizontal, degrees 26 25
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 34 34
Steered 0° USLS (First Lobe), dB 20 18
Steered 30° Gain, dBi 21.6 21.7
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 30 31

Electrical Specifications, Soft Split

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 21.3 21.3
Beamwidth, Horizontal, degrees 35 32
Front-to-Back Total Power at 180° ± 30°, dB 30 30
Horizontal Sidelobe, dB 17 17

Mechanical Specifications

Wind Loading @ Velocity, frontal 586.0 N @ 150 km/h (131.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 123.0 N @ 150 km/h (27.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 709.0 N @ 150 km/h (159.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.260 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 24.1 kg | 53.131 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification