Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

2UPX210B-T2-V2

4-port multibeam antenna, 4x 694–896 MHz, 2x 37° HPBW, 2x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt on both beams
  • Single panel design supporting two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresight

General Specifications

Antenna Type Multibeam
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2533 mm | 99.724 in
Net Weight, antenna only 56.6 kg | 124.781 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 896 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C
BASTA Version, electrical BASTA v12

Electrical Specifications

R1,R2 R1,R2
Frequency Band, MHz 694–806 806–896
RF Port 1-4 1-4
Gain at Mid Tilt, dBi 17.2 18.7
Beam Centers, Horizontal, degrees ±27 ±27
Beamwidth, Horizontal, degrees 40 35
Beamwidth, Vertical, degrees 8.8 7.6
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 18 16
Front-to-Back Ratio at 180°, dB 25 31
Front-to-Back Total Power at 180° ± 30°, dB 22 23
Isolation, Cross Polarization, dB 25 25
Isolation, Inter-band, dB 25 25
Isolation, Beam to Beam, dB 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 200 200

Mechanical Specifications

BASTA Version, mechanical BASTA v11
Wind Loading @ Velocity, frontal 1,102.0 N @ 150 km/h (247.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 372.0 N @ 150 km/h (83.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,497.0 N @ 150 km/h (336.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,135.0 N @ 150 km/h (255.2 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 744 mm | 29.291 in
Depth, packed 346 mm | 13.622 in
Length, packed 2662 mm | 104.803 in
Weight, gross 76.5 kg | 168.653 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2533 mm | 99.724 in
Net Weight, antenna only 56.6 kg | 124.781 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 896 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C
BASTA Version, electrical BASTA v12

Electrical Specifications

R1,R2 R1,R2
Frequency Band, MHz 694–806 806–896
RF Port 1-4 1-4
Gain at Mid Tilt, dBi 17.2 18.7
Beam Centers, Horizontal, degrees ±27 ±27
Beamwidth, Horizontal, degrees 40 35
Beamwidth, Vertical, degrees 8.8 7.6
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 18 16
Front-to-Back Ratio at 180°, dB 25 31
Front-to-Back Total Power at 180° ± 30°, dB 22 23
Isolation, Cross Polarization, dB 25 25
Isolation, Inter-band, dB 25 25
Isolation, Beam to Beam, dB 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 200 200

Mechanical Specifications

BASTA Version, mechanical BASTA v11
Wind Loading @ Velocity, frontal 1,102.0 N @ 150 km/h (247.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 372.0 N @ 150 km/h (83.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,497.0 N @ 150 km/h (336.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,135.0 N @ 150 km/h (255.2 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 744 mm | 29.291 in
Depth, packed 346 mm | 13.622 in
Length, packed 2662 mm | 104.803 in
Weight, gross 76.5 kg | 168.653 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification