1. Início
  2. Tipo de produto
  3. Antenas
  4. Antenas e equipamentos para estação rádio base
  5. Antenas para estação rádio base
  6. FF-65C-R1
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

FF-65C-R1

4-port sector antenna, 4x 617–806 MHz, 65° HPBW, 1x RET, 600MHz-Ready Antenna Technology

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Supports up to 10° of Mechanical Down Tilt

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2437 mm | 95.945 in
Net Weight, without mounting kit 53.5 kg | 117.947 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 806 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–806
Gain, dBi 15.4 15.6
Beamwidth, Horizontal, degrees 64 63
Beamwidth, Vertical, degrees 10.3 9.2
Beam Tilt, degrees 2–13 2–13
USLS (First Lobe), dB 19 17
Front-to-Back Ratio at 180°, dB 33 31
Isolation, Cross Polarization, dB 28 28
Isolation, Inter-band, dB 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153
Input Power per Port at 50°C, maximum, watts 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,055.0 N @ 150 km/h (237.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,433.0 N @ 150 km/h (322.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 382 mm | 15.039 in
Length, packed 2590 mm | 101.969 in
Weight, gross 79 kg | 174.165 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2437 mm | 95.945 in
Net Weight, without mounting kit 53.5 kg | 117.947 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 806 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–806
Gain, dBi 15.4 15.6
Beamwidth, Horizontal, degrees 64 63
Beamwidth, Vertical, degrees 10.3 9.2
Beam Tilt, degrees 2–13 2–13
USLS (First Lobe), dB 19 17
Front-to-Back Ratio at 180°, dB 33 31
Isolation, Cross Polarization, dB 28 28
Isolation, Inter-band, dB 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153
Input Power per Port at 50°C, maximum, watts 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,055.0 N @ 150 km/h (237.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,433.0 N @ 150 km/h (322.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 382 mm | 15.039 in
Length, packed 2590 mm | 101.969 in
Weight, gross 79 kg | 174.165 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted